APOLLO XP95 HEAT DETECTOR (A2S) 55000-420APO

Related products

• 

  wishlist

  APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)

  The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.

  • Resettable operating element
  • 170° viewable LED
  • Suitable for semi flush or surface mounting
  • ‘Plug and Play’ terminal connections for faster wiring
  • Continuity link for wiring test before commissioning
  • XP95, Discovery and CoreProtocol compatible

  Read more
• 

  wishlist

  EXD SOUNDER TCB-0017

  The EXD Sounder has been approved for use in potentially explosive atmospheres and very harsh environmental conditions.
  The unit incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
  The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.
  The design allows for termination inside the enclosure. The sounder is supplied with a mounting bracket as standard.

  Read more
• 

  wishlist

  Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)

  DESCRIPTION

  The VESDA-E VEA series of detectors
  combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
  The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
  VESDAnet™
  VESDA detectors and devices communicate on VESDAnet which provides a
  robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
  ETHERNET AND WIFI CONNECTIVITY
  VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
  wirelessly to the detector via the network.
  The VESDA-E VEA series of detectors
  combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors

  Read more
• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more