Popular
-
Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
-
Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
-
Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦5,455,000.00
-
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦18,500.00
Category: apollo
Showing 1–16 of 67 results
-
Out of StockAH (Fire Alarm) -9315 Combination Smoke and Heat Detector
Read moreCharacteristics Multi-purpose Design: when there is smoke or heat during pre-fire period, field situation will vary due to different environments. This combination design is to ensure that the pre-fire confirmation will not be affected by varying environments. Smoke gate has a special design to obscure the strong light effectively and allow smoke to come in …
AH (Fire Alarm) -9315 Combination Smoke and Heat DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3 by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
-
Apollo (Fire Alarm) AlarmSense High Temperature Heat Detector
₦14,000.00Add to cartAlarmSense High Temperature Heat Detector Part No. 55000-193APO A high quality Type CS static high temperature heat detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-5 by UL International (UK) …
Apollo (Fire Alarm) AlarmSense High Temperature Heat DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Integrating Optical Smoke Detector
Read moreAlarmSense Integrating Optical Smoke Detector Part No. 55000-391APO An integrating optical smoke detector. Responds well to slow-burning, smouldering fires. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International …
Apollo (Fire Alarm) AlarmSense Integrating Optical Smoke DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Open Area Sounder IP65
₦49,500.00Read moreAlarmSense Open Area Sounder IP65 Part No. 55000-018APO A powerful wall-mounting open-area Sounder suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Supply wiring 2-wire monitored, polarity insensitive. Supply/operating voltage 18-33VDC …
Apollo (Fire Alarm) AlarmSense Open Area Sounder IP65Read More
-
Out of StockApollo (Fire Alarm) AlarmSense Open Area Sounder/Visual Indicator
Read moreAlarmSense Open Area Sounder/Visual Indicator Part No. 55000-017APO A powerful wall-mounting open-area Sounder/Visual Indicator suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Ultra-bright red LED. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Download datasheet Flash rate & …
Apollo (Fire Alarm) AlarmSense Open Area Sounder/Visual IndicatorRead More
-
Apollo (Fire Alarm) AlarmSense Optical Smoke Detector
₦14,000.00Add to cartAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
Apollo (Fire Alarm) AlarmSense Optical Smoke DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Relay Module Part No. 55000-835APO
Read moreAllows devices such as vibrating pillow alarms or vibrating radio/paging devices to be connected to an AlarmSense system. Can also be used to monitor and switch conventional sounders and visual indicators. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Operates in three configurations:- (1) relay activation places the AlarmSense Zone voltage …
Apollo (Fire Alarm) AlarmSense Relay Module Part No. 55000-835APORead More
-
Out of StockApollo (Fire Alarm) AlarmSense Standard Rate of Rise Heat Detector
₦0.00Read moreAlarmSense Standard Rate of Rise Heat Detector Part No. 55000-190APO A high quality Type A1R rate of rise heat detector. Suitable for use with C-TEC’s CFP AlarmSenSe range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-5 by UL …
Apollo (Fire Alarm) AlarmSense Standard Rate of Rise Heat DetectorRead More
-
Out of StockAPOLLO Addressaable Fire Alarm AV Control Module XP95A
Read moreThe XP95A AV Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel.
- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronized when in pulsed operation
- Can also be used for public address speakers
-
Out of StockAPOLLO ADDRESSABLE FIRE ALARM XP95 OPEN-AREA VID – WHITE BODY (WHITE FLASH) 55000-878APO
₦0.00Read moreThe XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.
- High intensity LEDs
- More reliable than xenon visual indicators
- Automatic LED check
- Lockable
- Wide angle of visibility
- Enables DDA compliance
- Synchronised flash
- Can be used with Discovery or XP95
-
Out of StockAPOLLO ADDRESSABLE FIRE AARM XP95 OPTICAL SMOKE DETECTOR – BLACK 55000-660APO
₦0.00Read moreThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO Addressable Fire Alarm INPUT SWITCH MONITOR MODULE SA4700-102APO
₦45,000.00Add to cartThe Dual Input Monitor Module Is a loop-powered device incorporating a dual monitored input circuit for connection to remote switches.
- Built-in isolator
- Tri-coloured LEDs status reporting
- Ground fault detection
- Easy to install
- Interrupt facility
- Selectable priority of inputs
-
Out of StockAPOLLO Addressable Fire Alarm SOTERIA UL NAC MODULE
Read moreThe NAC Module enables sounders to be operated continuously or be pulsed. Sounders may be operated individually or in groups and whichever address mode has been applied may be synchronized when in pulsed operation.
- Built-in isolator
- Tri-coloured LEDs status reporting
- Ground fault detection
- Easy to install
-
Out of StockAPOLLO ADDRESSABLE FIRE ALARM XP95 OPEN-AREA VID – RED BODY (RED FLASH) 55000-877APO
₦0.00Read moreThe XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.
- High intensity LEDs
- More reliable than xenon visual indicators
- Automatic LED check
- Lockable
- Wide angle of visibility
- Enables DDA compliance
- Synchronised flash
- Can be used with Discovery or XP95
-
Out of StockAPOLLO ADDRESSABLE FIRE ALARM XP95A HEAT DETECTOR – UL521 7TH EDITION SA5500-450APO
Read moreThe XP95A Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature. It is classified as an ordinary detector by UL.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
