Popular
C-TEC 24V 1.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC283/2
- A high-quality 24V 1.2Ah Valve Regulated Sealed Lead Acid battery pack.
- Comprises 2 x 12V rechargeable batteries and a link wire.
- Each battery measures 97 W x 50 H x 43 D mm.
- Quick connect 4.75mm ‘Faston’ type terminals.
-
Product dimensions (mm) 97 W x 50 H x 43 D mm (height measurement includes terminals). Weight 2 x 0.50kg. Operating conditions/temperature -25ºC to +60ºC (storage); -15°C to +50°C (charge); -20°C to +60°C (discharge). Notes Batteries must be recycled at end of life in accordance with local and national laws and regulations
| Dimensions | 4.3 × 9.7 × 5.0 cm |
|---|
Related products
-
GENT COMPACT-FLUSH-SS STAINLESS STEEL DOOR FOR COMPACT REPEAT
₦1,000,000.00Add to cartDescription
Gent COMPACT-FLUSH-SS Main Control Panel Stainless Steel Flush Mounting Kit
The COMPACT-FLUSH-SS is a Main Control Panel Flush Mounting Kit.
-
Texecom EXD Buzzer TCA-0005
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions. -
Gent by Honeywell VESDA-E VEA-40 Aspirating Smoke Detector with LED Displays(VEA-040-A00)
Read morecombine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.