Popular
-
AH Gas Detector
Original price was: ₦ 30,000.00.₦ 25,000.00Current price is: ₦ 25,000.00.
-
C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
Original price was: ₦ 125,000.00.₦ 120,000.00Current price is: ₦ 120,000.00.
-
SOCA SL-130 Dead Bolt Lock ( All purpose type )
Original price was: ₦ 15,000.00.₦ 13,000.00Current price is: ₦ 13,000.00.
-
SOCA SL-100D Dead Bolt Lock ( for automatic door)
Original price was: ₦ 16,380.00.₦ 13,650.00Current price is: ₦ 13,650.00.
-
SOCA SL 100A Dead Bolt
₦ 15,000.00
C-TEC 24V 5A Encased Switch Mode PSU to EN54-4/A2 Part No. BF562-5/E
- A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
- Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
- Includes the same electronics as our BF562-5 LPCB/VDS certified EN54-4/A2 boxed 24V 5A PSU.
- Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
- Includes a single-pole volt-free changeover relay that switches for any fault condition.
- Includes a fault type & hazardous voltages present LED.
- Two selectable battery charge currents.
- Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
- Mains fail simulation mode.
- Improved on-board temperature sensor with optional remote sensor.
- Electronic functions comply with EN50131-6 grades 1-4 for security applications.
PSU CUSTOMISATION
The BF562-5/E can be optionally customised to suit your exact requirements using a BF423 configurator and PC. Configurable parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
PSU STATUS LED (located on the PSU PCB)
1 flash = Mains Failure.
2 flashes = Battery Voltage Low.
3 flashes = Battery Voltage Critical.
4 flashes = Charger Failure.
5 flashes = Charger OK (Battery is either actively charging, or in float charge).
6 flashes = No Batteries Fitted (indicating DIP Switch 4 position).
7 flashes = Battery Resistance Fault (Level set by DIP Switch 2 position).
8 flashes = Output Over Voltage.
BATTERY FAULT MONITORING
The BF562-5/E monitors battery resistance to the requirements of EN54-4/A2. The fault threshold is directly related to the ability of the battery to deliver the rated current to the load. For example, batteries stored uncharged for long periods, during shipment and/or distribution, degrade leading to increased internal resistance. If a degraded battery is fitted, a fault will be shown by the PSU as mandated by EN54-4/A2.
DATA PORT
Data on the BF562-5/E’s status can be extracted from the PSU’s bi-directional data port. The data available includes thermistor measurements; battery terminal voltage; system voltage at load terminals; battery charge current; load current; battery impedance and ASCII text string status messages. Extracting this data requires additional equipment and permissions – contact C-TEC for details.
Related Products
-
C-TEC 24V 250mA Door Release Power Supply Unit c/w detector circuit Part No. BF375PE
Read more- A compact double gang Mains derived power supply c/w a conventional fire detector circuit.
- Designed to provide power to up to 5 x 50mA 24V DC electromagnetic door retainers.
- When used with two x ActiV fire detectors allows a cost-effective ‘stand-alone’ automatic door release system to be built (pre-packed BF375PEK kits are available).
- Maximum PSU output is 250mA.
- Trigger Release and fault monitored Zone Trigger inputs facilitate straightforward connection to fire alarm detectors, control panels, building management systems, timers, relays and other ancillary equipment.
- Includes a manual release button, a Mains On and an Output Triggered indicator.
- Can be mounted on a standard 25mm UK double gang flush or surface back box.
- The BF375PE is also available as part of our BF375PEK automatic door release system kit which includes 1 x BF375PE, 2 x ActiV fire detectors, 2 x ActiV detector bases and 1 x electromagnetic door retainer.
-
C-TEC 24V 2A Unregulated Door Release PSU Part No. BF377
Read more- A boxed door release power supply unit designed to provide DC power to 24V DC electromagnetic door retainers.
- Can be controlled automatically from a fire alarm control panel or manual release keyswitch.
- 2A max. output.
- Includes Mains On and Output Triggered indicators
- No battery back up facility.
- Download datasheet
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.