Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00₦6,170,000.00 -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00₦18,500.00 -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00₦458,000.00 -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00₦19,000.00 -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00₦4,500,000.00 -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00₦21,500.00 -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00₦11,000.00
C-TECH ActiV Conventional FIRE ALARM SYSTEM C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W
₦0.00
-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘O-R-3-2.5-17’ light distribution.
- Ideally suited for use in corridors and other rectangular areas.
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
Out of stock
Compare-
Approvals/certifications Certified to EN54-3 & 23 by the LPCB & VdS. Protocol/compatibility Compatible with C-TEC’s CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use) Application/operation Designed to be ceiling mounted – either stand-alone with a red or white cap or as part of a stacked Sounder/VAD/Detector Base combination. VAD category & coverage O-R-3-2.5-17 Rectangular coverage – ideal for corridor spaces. Flash rate & colour 0.5Hz; 1Hz or OFF / White. Supply/operating voltage 18 to 30V DC. Nominal SPL (Sound Pressure Level) 96dB(A). Alarm current At 30Vdc: 12.2mA (0.5Hz) or 19.5mA (1Hz); At 18Vdc: 14.5mA (0.5Hz) or 25mA (1Hz) Product dimensions (mm) 122mm diameter x 46mm deep (not including optional detector and base). IP Rating IP21C (Type A). Weight 170g. Operating conditions/temperature -10ºC to +55ºC. Max. 95% RH (Non-condensing). Notes For compliance to EN54-3 & EN54-23, the BF431QCP Quick Connect Plate must be used with the base device.
Related products
-
Out of Stock
Gent Fire Alarm VCS-PSU-N Compact Replacement PSU
₦0.00Read moreDESCRIPTION
Gent VCS-PSU-N Compact Replacement PSU
The VCS-PSU-N Replacement PSU is designed for use with the Gent Nano and Gent Compact controls panels.
-
Out of Stock
APOLLO Addressable Fire ALarm ISOLATOR
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.
- Detects wiring short-circuits using patented technology
- Minimizes disruption from short-circuits
- Automatic de-isolation on short-circuit removal
- Up to 20 devices may be installed between isolators
-
Out of Stock
Gent by Honeywell Fire Alarm Conversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality (VIG-BSKIT-NODE)
Read moreGent VIG-BSKIT-NODE Conversion Kit
The VIG-BSKIT-NODE Conversion Kit for is designed for use with the VIG1-24 EN 54 to BS V3+ Functionality (Replaces VIG1-V3+) Loop Only.
Please Note: The BS or V3+ variants of Vigilon are no longer available. VIG-NODE-24 (EN54 version) panels may be converted to BS protocol using the conversion kit VIG-BSKIT-NODE.
-
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00₦11,000.00Add to cartThe Smart Smoke Detector improves the security of your home.
When a fire breaks out and the Smart Smoke detector activates, it sends real-time notifications directly to your smartphone,
In this way, you can intervene even when you are not at home.
The wireless WiFi smart smoke sensor ensures an adequate level of fire safety when you are in the house by activating the siren with an intensity of 80dB.
Using the Tuya Smart and SmartLife application based on IoT (internet of things) technology, you are notified on your mobile phone in the event of a fire.
Useful for installation in homes, businesses, hospitals, restaurants and other places that need protection.
The LED lights red twice a minute to signal a battery change and a low battery notification on the phone.
Notification if the battery access cover is open.
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.