Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00₦6,170,000.00 -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00₦18,500.00 -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00₦458,000.00 -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00₦19,000.00 -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00₦4,500,000.00 -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00₦21,500.00 -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00₦11,000.00
- Allows devices such as vibrating pillow alarms or vibrating radio/paging devices to be connected to an AlarmSense system.
- Can also be used to monitor and switch conventional sounders and visual indicators.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Operates in three configurations:-
- (1) relay activation places the AlarmSense Zone voltage across the output terminals.
- (2) relay activation reverses the polarity of the AlarmSense Zone voltage across the output terminals (to allow the use of monitored conventional sounders fitted with series diodes).
- (3) Two sets of volt-free contacts for use with door closure units, etc.
- Relay can be set to priority or non-priority by means of a DIL switch.
Protocol/compatibility | Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. |
Supply/operating voltage | 9 to 33V DC. (Relay operation voltage less than 18V; Relay reset voltage less than 15V). |
Quiescent current | 20µA. |
Product dimensions (mm) | 65 W x 45 H x 25 D mm. |
IP Rating | TBC. |
Weight | 35g. |
Properties | Relay contact ratings 1A @ 30VDC. |
Operating conditions/temperature | -40ºC to +70ºC. |
Notes | Alarm relay resets on silence. |
Related products
-
Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 4″ – ISOLATING
Read moreThe base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits.
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
-
Out of Stock
Gent Fire Alarm VCS-PSU-N Compact Replacement PSU
₦0.00Read moreDESCRIPTION
Gent VCS-PSU-N Compact Replacement PSU
The VCS-PSU-N Replacement PSU is designed for use with the Gent Nano and Gent Compact controls panels.
-
Out of Stock
APOLLO Addressable Fire Alarm DISCOVERY UL MANUAL PULL STATION BACKBOX
Read moreThe Discovery UL Manual Pull Station Backbox is used to allow surface mounting of the Discovery UL Manual Pull Station.
-
Out of Stock
CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)
₦0.00Read more-
Product dimensions (mm) 82 W x 125 H x D 23mm. Weight 64g. Properties Single pole changeover contacts; Rated at 1A 50V; 50V Isolation between relays, contacts and CFP & relays; 27mA active relay coil current @ 27.6V supply.
-
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More