Gent XENS-MCB-2 Replacement PCB Assembly

Related products

• 

  wishlist

  C-TEC ActiV Conventional O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder Part No. BF432C/CC/W

  • • • • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
        • Provides ‘C-3-8.5’ light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area).
        • Impressive 96dB(A) sound output @ 1m.
        • Includes 31 selectable primary tones and an optional secondary tone.
        • Two volume levels (high and low)
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
        • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Relay Base with Diode Part No. C4408DR

  • • Compatible with C-TEC’s entire range of ActiV fire detectors.
    • Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output.
    • Ideal for switching CCTV, security and door retaining systems.
    • Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
    • Easy to fit with lots of working space.
    • Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
    • Integrated detector/base locking mechanism, head removal tool and ID tag.
    • Simple ‘click and twist’ design.
    • Remote LED terminals for the optional connection to a BF318 Remote indicator.
    • C4408R non-diode relay base also available for use on systems that do not require head out monitoring.

    Download datasheet

  Read more
• 

  wishlist

  APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO

  • Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
  • 70d-87dB(A) sound output (visual indicator activates with sounder).
  • Certified to EN54-3 by UL International (UK) Limited.
  • Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
  • AlarmSense priority/non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detector.
  • High and low volume ranges.
  • Red and white caps available for stand-alone use.
  • Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W

  • • • • Superb sound intelligibility.
        • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
        • Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
        • Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more