Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00₦6,170,000.00 -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00₦18,500.00 -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00₦458,000.00 -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00₦19,000.00 -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00₦4,500,000.00 -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00₦21,500.00 -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00₦11,000.00
Notifier Sounder Base Conventional NBS4
₦0.00
Non-Addressable Detector Base Sounder, 4 Tone, Suitable for fire detectors with 60mm mounting centres. approved to EN54-3.
If required the SC085 (white) lid to be ordered separately.
• 4 Tone Sounder
• High sound output, low current consumption
• High reliability and stable performance
• Volume control
• Lid accessory available to enable vertical installation
• Designed and approved to EN54-3
• Market specific tone set available
Out of stock
CompareManufactured by Honeywell Notifier, the Notifier Sounder Base Conventional NBS4 is a conventional fire alarm electronic sounder which is ideal for use on modern conventional fire alarm systems. It has been specifically designed to be used on a 24 volt conventional sounder circuit. The Notifier Sounder Base Conventional NBS4 is able to accommodate a detector and base on top of the NBS4 unit, which gives the detector and sounder in a single point. This NBS4 can accommodate most modern detectors and bases.
NOTIFIER SOUNDER BASE CONVENTIONAL NBS4 – HONEYWELL KEY PRODUCT FEATURES:
- Part Number: NBS4
- 4 Tones
- Colour is Ivory
- Platform Base Sounder
- High sound output, low current consumption
- High reliability and stable performance
- Volume control
- Lid accessory available to enable vertical installation
- Designed and approved EN54-3
- Market specific tone set available
NOTIFIER SOUNDER BASE CONVENTIONAL NBS4 – HONEYWELL – TECHNICAL SPECIFICATION:
-
- Voltage Range : 21 to 27V dc
- Sound Output : 93 dB(A) @ 1 meter
- Current Consumption : 12mA @ 24V dc
- Max Wire Size : 2.5mm Square
- Temperature Range : -30 to +70 Degrees Celsius
Related products
-
Out of Stock
APOLLO Addressable Fire Alarm DISCOVERY UL MANUAL PULL STATION BACKBOX
Read moreThe Discovery UL Manual Pull Station Backbox is used to allow surface mounting of the Discovery UL Manual Pull Station.
-
Solo 100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
₦685,000.00₦675,000.00Add to cart- SOLO 100/108 Telescopic Poles
- Exceptionally lightweight and very portable
- Lock system as standard named “Totalock”
- Non Conductive Material
- Makes the job more efficient
- Strong & Durable Fibreglass
- Can be used with all SOLO tools and attachments
- Use with tools up to 6 metres (Including Height of Man)
- Add SOLO 101-001 Extension poles to reach 9 metres (Including Height of Man)
-
Out of Stock
CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)
₦0.00Read more-
Product dimensions (mm) 82 W x 125 H x D 23mm. Weight 64g. Properties Single pole changeover contacts; Rated at 1A 50V; 50V Isolation between relays, contacts and CFP & relays; 27mA active relay coil current @ 27.6V supply.
-
-
C-TEC Fire Alarm CONVENTIONAL ActiV Diode Base Part No. C4408D
₦4,500.00₦3,000.00Add to cart-
- Compatible with C-TEC’s entire range of ActiV fire detectors.
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
- Easy to fit with lots of working space.
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
- Integrated detector/base locking mechanism, head removal tool and ID tag.
- Simple ‘click and twist’ design.
- Remote LED terminals for the optional connection to a BF318 Remote indicator.
- C4408 non-diode and C4408R relay bases also available.
-
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.