\n\n| Compatibility<\/td>\n | Designed to comply with the requirements of BS5839-4 (for head-out monitoring use 1 x BF378M module per zone).<\/td>\n<\/tr>\n |
\n| Mains supply<\/td>\n | 230V 50\/60Hz.<\/td>\n<\/tr>\n |
\n| Mains rated current<\/td>\n | 330mA max.<\/td>\n<\/tr>\n |
\n| Internal power supply<\/td>\n | 27V nominal.<\/td>\n<\/tr>\n |
\n| Total output current limited to<\/td>\n | 1400mA @ 230V.<\/td>\n<\/tr>\n |
\n| Quiescent current<\/td>\n | 70mA (with no mains supply, fault beeper muted, no aux. output connections, EOL devices and resistors only fitted to detector and sounder loops).<\/td>\n<\/tr>\n |
\n| Max battery size and type<\/td>\n | 2 x 12V 3.2Ah VRLA connected in series.<\/td>\n<\/tr>\n |
\n| No. of detector zone circuits<\/td>\n | 8 (Max. length per circuit is 500m). Additional Zones cannot be added to this panel. For head out monitoring 1 x BF378M is required per Zone.<\/td>\n<\/tr>\n |
\n| Call point resistor value<\/td>\n | 470 to 680\u03a9.<\/td>\n<\/tr>\n |
\n| Max. devices per detector zone<\/td>\n | 20 detectors (max. detector current 2mA). No limit for manual call points.<\/td>\n<\/tr>\n |
\n| No. of conventional sounder circuits<\/td>\n | 2 (Max. length per circuit is 500m).<\/td>\n<\/tr>\n |
\n| EOL resistor value<\/td>\n | 6800\u03a9 5% Tol. 0\/25W (blue, grey, red, gold).<\/td>\n<\/tr>\n |
\n| Max. sounder output current<\/td>\n | 1400mA (to all outputs). Outputs are fused at 1A.<\/td>\n<\/tr>\n |
\n| Auxiliary relays<\/td>\n | 1 x onboard relay (1A, 30 VDC, follows sounders). Additional relays available via optional expansion looms (FF374FR, FF374FDR & FF374DT).<\/td>\n<\/tr>\n |
\n| Open collector outputs<\/td>\n | Available via optional expansion loom FF374X.<\/td>\n<\/tr>\n |
\n| Auxiliary inputs<\/td>\n | Available via optional expansion loom FF374X.<\/td>\n<\/tr>\n |
\n| Indicators<\/td>\n | Mains on; Zone Fire; Zone Fault; Sounder Fault; Battery\/Power Supply Fault; O\/C fault; S\/C fault; Zone isolated; Engineer Test selected.<\/td>\n<\/tr>\n |
\n| Controls<\/td>\n | Reset; Resound; Test Zone Lamps; Evacuate; Silence Alarm Sounders; Silence Fault Sounders; Revert to S\/C equals Fire; OMT, Zone Isolate. Keyswitch.<\/td>\n<\/tr>\n |
\n| Product dimensions (mm)<\/td>\n | 405 W x 267 H x D 92mm.<\/td>\n<\/tr>\n |
\n| Construction & finish<\/td>\n | Metal lid and base.<\/td>\n<\/tr>\n |
\n| IP Rating<\/td>\n | IP30.<\/td>\n<\/tr>\n |
\n| Weight<\/td>\n | 5.0kg.<\/td>\n<\/tr>\n |
\n| Operating conditions\/temperature<\/td>\n | -5\u00baC to +40\u00baC. Max relative humidity: 95%.<\/td>\n<\/tr>\n |
\n| Notes<\/td>\n | \n\n- Repeater info: Up to 3 repeaters per main. 5 cores plus 1 per zone. Max. cable length 200m.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
\n \n \n- \n
\n \n \n- \n
\n \n \n- \n
\n \n \n- DESCRIPTION<\/strong><\/li>\n
- Installer-friendly design<\/li>\n
- Robust metal enclosure c\/w lift off lid & heavy-duty base connections.<\/li>\n
- 12 conventional Zone circuits (expandable to 14).<\/li>\n
- Two conventional Sounder circuits.<\/li>\n
- Separate indicators for open &\u00a0short circuit fault, sounder fault and battery\/power supply fault.<\/li>\n
- Non-latching class change sounder output, latching fire &\u00a0non-latching fault outputs (via expansion loom).<\/li>\n
- Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).<\/li>\n
- Ancillary\u00a0connections\u00a0for repeaters &\u00a0other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).<\/li>\n
- Multi-lingual variants (subject to quantities).<\/li>\n
- Space for 2\u00a0x 12V 7Ah VRLA batteries.<\/li>\n
- Compatible with\u00a0virtually all known conventional fire detectors including\u00a0C-TEC’s ActiV range.<\/li>\n
- Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2\/4 and should\u00a0NOT\u00a0be used in new\u00a0UK or European installations).<\/li>\n<\/ul>\n<\/div>\n<\/div>\n
<\/ul>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n","protected":false},"featured_media":5714,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[442,315,313],"product_tag":[565],"class_list":["post-5715","product","type-product","status-publish","has-post-thumbnail","hentry","product_cat-control-panel-fire-alarm-system","product_cat-conventional-fire-alarm-system","product_cat-fire-alarm-system","product_tag-ff388-2","product_shipping_class-very-heavy-items","thunk-woo-product-list","opn-qv-enable","top-store-woo-hover-zoom","top-store-single-product-tab-horizontal","top-store-shadow-","top-store-shadow-hover-"],"_links":{"self":[{"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/product\/5715","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/comments?post=5715"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/media\/5714"}],"wp:attachment":[{"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/media?parent=5715"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/product_cat?post=5715"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/safetechhub.com\/wp-json\/wp\/v2\/product_tag?post=5715"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |