Popular
PAXTON Net2 Plus 1 door ACU in plastic housing 682-528
₦187,000.00
- Single door network able access control unit
- Plug into a TCP/IP network using a RJ45 plug
- Features a built in TCP/IP converter
- Different control units can be mixed on a site
- Use Paxton or 3rd party readers
- FLASH memory allows easy upgrades
About – Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users’ access. Each control unit is part of a network but can run independently making its own decisions and remembering events.
The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control unit also has a RS485 connection. This means it can be connected to other Net2 plus or Net2 classic control units using a dedicated CAT5 cable.
One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus or Net2 classic units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is also available with a Power over Ethernet (PoE) power supply. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a compatible PoE switch or a PoE injector).
Control units are sold as a PCB only, within a plastic housing or mounted within a 2A boxed metal/plastic mains monitored backup power supply. The Net2 plus unit now comes with PoE+ power supply in metal/plastic cabinet; no separate mains supply back-up required.
Installation – A label on the Net2 plus control unit clearly shows colour coded connections for reader, power supply etc. The unit has a voltage free relay and so can switch any lock or electrical device. Exit buttons, door contacts, tamper switches and alarm devices may be connected.
Control units communicate to the PC via the standard TCP/IP protocol of a LAN. The Net2 plus control unit should be given a fixed/static IP address. All configuration of the unit is done using the Net2 Configuration Utility.
There are diagnostic LEDs mounted close to their relevant terminals to assist with trouble free installation. End of line resistors can be switched into the circuit as required. External terminating resistors are not required.
Operation – Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
| Weight | 0.88 kg |
|---|---|
| Dimensions | 23.2 × 32.0 cm |
Related products
-
PAXTON NET2 P50 PROXIMITY READERS(353-110 EX)
₦69,500.00Add to cartUse with Switch2 or Net2Simple mountingRange up to 100mm with Proximity cardsBlack or white fasciasLow profile – less than 16mm deep -
SOCA SI-25 EXITBUTTON WITH INFRARED SWITCHING
₦5,100.00Add to cartFeaturesInfrared type:
- Strong and durable SUS304 stainless steel panel design which resists strong acid and alkali.
- SI-10 as mini infrared detector for access control push button auto-control detection.
- Suitable for hollow door frame and electrical box use. Voltage :DC12V~24V±10%.
- Specially designed to prevent any interference from other infra-red.
- The diagram shows world universal use.
- The front of the detector is waterproof design with IP65 and above.
- Adjustable proximity range (4~15cm). Stable proximity range.
- Door opening time is able to set Trigger state (0.5~20sec) or Toggle mode output.
- Operation temperature range: -10℃~70℃.Humidity 85%Rh max.
- Contact rating: 1A@30VDC N.O./N.C. Output.
- Dimensions:
SI-20：115X39X26(mm)
SI-60：115X70X26(mm)
SI-80：86X86X26(mm) - Weight:
SI-10: 10g
SI-12: 21g
SI-15: 24g
SI-18: 50g
SI-20: 75g
SI-60: 105g
SI-80: 100g
-
Soca Surface Mount Bracket
Read more- To be used with SL-100 Dead Bolt Lock.
- Suitable for all types of 90º or 180º door.
- Surface mount the bracket when unable to drill hole in the door frame.
- Glass door.
- Thickness of door : 9mm – 12mm.
- The distance between door and door frame at least 6 mm
- Sturdy built for durability.
- Simple installation without knocking any holes out.
- Able to integrate with UB-100 glass holder.
- Optional of BR-100C Bracket available.
-
PAXTON ENTRY STANDARD PANEL – SURFACE MOUNT
Read moreEntry is a door entry system that works standalone or alongside Paxton’s Net2 access control or Paxton10, access control and video management, combining door entry with key features of our access control software. The Entry standard panel is a robust external panel for use with Paxton’s door entry system, Entry. This panel comes in industry recognised anthracite grey (RAL7021), meaning it complements the windows and doors of many new builds and modern apartments.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.