Wireless gas leak detector

Related products

• Sale!

  wishlist

  Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base

  ₦17,000.00 ₦15,000.00

  DESCRIPTION

  The Fyreye fixed heat detector (MKII-HF) has a
  single thermistor arrangement that gives an alarm at a
  temperature of 57°C.
  There are 4 types of mounting base available; standard
  or deep and with or without diode.

  Add to cart
• 

  wishlist

  APOLLO ISOLATOR – NEGATIVE 55000-720APO

  The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section

  • Detects wiring short-circuits
  • Minimises disruption from short-circuits
  • Automatic de-isolation on the short-circuit removal

  Read more
• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more
• 

  wishlist

  APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)

  The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.

  • Resettable operating element
  • 170° viewable LED
  • Suitable for semi flush or surface mounting
  • ‘Plug and Play’ terminal connections for faster wiring
  • Continuity link for wiring test before commissioning
  • XP95, Discovery and CoreProtocol compatible

  Read more