Popular
Gent S3 White-Body Sounder High-Power with Red VAD – (S3-S-VAD-HPR-W)
₦40,000.00
Gent S3 White-Body Sounder High-Power with Red VAD
Gent S3 White-Body Sounder High-Power with Red VAD (S3-S-VAD-HPR-W) is a part of the comprehensive range of loop-powered alarm sounders with integrated voice and EN54-23 certified visual alarms that the S-Cubed offers. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop-powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation. Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturer
Gent S3 White-Body Sounder High-Power with Red VAD
Gent S3 White-Body Sounder High-Power with Red VAD (S3-S-VAD-HPR-W) is a part of the comprehensive range of loop-powered alarm sounders with integrated voice and EN54-23 certified visual alarms that the S-Cubed offers. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop-powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation. Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturer
KEY FEATURES
- Each loop can support up to 200 voice sounders, 100 visual alarm devices (VADs), and up to 70 combined sounder VADs
- EN54-23 VADs with adjustable light coverage matching the sounder output
- Comprehensive and easy to use design and commissioning tools
- Four voice phrases and a bell tone are available as standard Voice and tone modes can be freely configured within the same sounder
- Active background monitoring of sounder and VAD circuits
- Adjust the sounder volume via the commissioning tool, the panel, or the HandiLink infrared remote control
| Weight | 0.3 kg |
|---|---|
| Dimensions | 11.2 × 11.2 × 7.5 cm |
Related products
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure
Read moreDESCRIPTION
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
-
Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)
Read moreDESCRIPTION
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
VESDAnet™
VESDA detectors and devices communicate on VESDAnet which provides a
robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
ETHERNET AND WIFI CONNECTIVITY
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
wirelessly to the detector via the network.
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors -
Reset Call Point Waterproof Reset Call Point
₦21,000.00Add to cartDESCRIPTION
The ZT-CP3 and ZT-CP3/WP call points are
unique in that they mimic the feel of breaking
glass whilst offering the user the benefits and
environmental advantages of a re-settable
operating element.
The CP3 uses a simple yet ingenius patented mechanism
which consists of a rigid plastic operating element and
an over centre spring mechanism. This arrangement
provides real action on operation and simulates break
glass activation.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.