Popular
ZT-ST5-10 Zeta 3V Standalone Smoke Detector (10 Year Life)
They feature VdS and UL-approved photoelectric sensing components with precise smoke detection and long life operation (5 year life with a 3V lithium battery) or (10 years with a 3V long life lithium battery). A proved quality with 10 million pieces installed over the world. Russian standard model available too.
Zeta Battery Operated Detectors
The ZT-ST5 & ZT-ST5/10 stand-alone photoelectric residential smoke alarms are NF approved and can be calibrated to either UL, BSI or VdS requirements.
They feature VdS and UL-approved photoelectric sensing components with precise smoke detection and long life operation (5 year life with a 3V lithium battery) or (10 years with a 3V long life lithium battery). A proved quality with 10 million pieces installed over the world. Russian standard model available too.
The ZT-TH5 stand-alone heat detector was designed with precise microprocessor control integrating both Rate-of- Rise and Fixed Temperature heat detection.
It’s perfectly suitable for installation in all environments especially the kitchen, garage, factory etc. The ZT-TH5 uses a 9V alkaline battery and meets EN 54-5 standards.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZT-ST5-10 | Zeta 3V Standalone Smoke Detector (10 Year Life) | Datasheet |
| Dimensions | 15 × 9 × 4.5 cm |
|---|
Related products
-
C-TEC ActiV Conventional C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W
Read more-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘O-R-3-2.5-17’ light distribution.
- Ideally suited for use in corridors and other rectangular areas.
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc =Â 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc =Â 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
C-TEC ActiV Conventional O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder Part No. BF432C/CC/W
Read more-
-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘C-3-8.5’ light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area).
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc =Â 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc =Â 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
-
APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3Â by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
-
Gent 4 ZONE CONVENTIONAL PANEL, EN54 LESS BATTERIES (13270-04LB)
₦235,500.00Add to cartDESCRIPTION
Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.