Popular
Zeta Intrinsically Safe Flame Detector (ZIS-FLD)
Technical Specification
- Voltage: 12 ÷ 28 V
- Max. quiescent current: 100 μA
- Alarm current at 20 V DC:Â 20 mA
- Detection distance:Â 17m max. (2nd class of sensitivity)
- View angle:Â 120o
- Wave detected:Â UV
- Operation temperature range:Â from -25 oC up to +55 oC
- Relative humidity:Â up to 95 % at 40 oC
- Colour:Â Black
- Dimensions:Â 107 dia. x 60 mm
- Weight:Â 0.45kg
Zeta Intrinsically Safe Flame Detector
The ZIS-FLD flame detector is designed for detection and signalisation of a flame ignition in case of a re hazard.
The ZIS-FLD flame detector is intrinsically safe (IS) to be used in explosion hazard areas. It operates in detection lines connected to Zeta re alarm system control panels with an appropriate spark proof separator.
The ZIS-FLD detector is designed for conventional use.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZIS-FLD | Zeta Intrinsically Safe Flame Detector | Datasheet |
Related products
-
C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (shallow base) Part No. BF430C/CC/SR
Read more- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP21C rated.
- Manufactured in the UK by C-TEC.
-
C-TEC ActiV Conventional O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder Part No. BF432C/CC/W
Read more-
-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘C-3-8.5’ light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area).
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc =Â 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc =Â 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
-
Reset Call Point Waterproof Reset Call Point
₦21,000.00Add to cartDESCRIPTION
The ZT-CP3 and ZT-CP3/WP call points are
unique in that they mimic the feel of breaking
glass whilst offering the user the benefits and
environmental advantages of a re-settable
operating element.
The CP3 uses a simple yet ingenius patented mechanism
which consists of a rigid plastic operating element and
an over centre spring mechanism. This arrangement
provides real action on operation and simulates break
glass activation. -
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.