Popular
C-TEC Economy Status Unit Part No. EP211
₦59,000.00
-
-
- Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
- Includes a mode (auto/manual) keyswitch.
- Mounts on a standard UK single gang 25mm flush or surface back box.
- Max. 8 economy status units per EP203 panel.
-
-
Power requirements 21-28VDC (100mA electronic fuse). Quiescent current 5mA. Auxiliary inputs None. Indicators Release Imminent; Manual/Automatic operation; Manual Only operation. Controls Operation keyswitch (Manual only or Manual & Auto). Product dimensions (mm) 87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box. Construction & finish Plastic. IP Rating IP40. Weight 86g. Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%. Network specification Max. 8 EP211’s per EP203 panel. Four wire connection (2 power, 2 data); Daisy-chain wiring. A 6K8 end of line resistor must be connected across the terminals of the last EP211 in the chain.
Related products
-
Gent 4 ZONE CONVENTIONAL PANEL, EN54 LESS BATTERIES (13270-04LB)
₦235,500.00Add to cartDESCRIPTION
Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Read more-
-
-
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
- Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
-
Zeta Fyreye MKII Diode Base
₦1,500.00Add to cartDESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.