Popular
Category: Analog Fire Alarm System
Analog fire alarm system operate by receiving signal from single cable that connects all of the detection units. The systems interact with the control panels via a single continuous line that connects all equipment. It decreases the risk of wiring problems.
This increased trustworthiness ensures that no false alarms, unnecessary evacuations, or emergency procedures disrupt business operations. When an Analog fire system’s fire alarm goes off, residents can respond appropriately and without hesitation. The single wire connection feature has a number of advantages for the maintenance and efficiency of the fire alarm system.
Adding or removing alarms throughout a facility, the singular wiring enables for smoother and faster installations. This helps to keep installation labor expenditures to a minimum.
Showing 1–16 of 145 results
-
AlarmSense Optical Smoke Detector
Read moreAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
-
Analogue Addressable Manual Call Points- S4-84845
₦42,000.00Add to cartDescription
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting. -
APOLLO ISOLATOR – NEGATIVE 55000-720APO
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section
- Detects wiring short-circuits
- Minimises disruption from short-circuits
- Automatic de-isolation on the short-circuit removal
-
APOLLO XP95 HEAT DETECTOR (A2S) 55000-420APO
Read moreThe XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.
- Reliable fire detection in areas with a wide temperature range from -20°C to +70°C
- Ideal for environments that are dirty or smoky under normal circumstances
- Unaffected by wind and atmospheric pressure
-
APOLLO XP95 MULTI-SENSOR DETECTOR (OPTICAL/HEAT) 55000-885APO
Read moreThe XP95 Multi-Sensor Detector combines independent optical smoke and temperature sensors for better fire detection in areas with deceptive phenomena.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Unaffected by wind and atmospheric pressure
- Alternative to Ionisation detectors
-
APOLLO XP95 OPTICAL SMOKE DETECTOR – BLACK 55000-660APO
Read moreThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO XP95 OPTICAL SMOKE DETECTOR 55000-600APO
₦24,500.00Add to cartThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
Combination Optical / Thermal Smoke Sensor (58 °C) (ECO1002-A)
Read moreFeatures- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy maintenance
- Remote LED Option
- Approved to EN54-7:2000 (Amendment 1)
- EN54-5:2000 (Amendment 1) Class A1R; CEA 4021
- Extended warranty
-
FS20X-211-24-6: Dual IR/UV Flame Detector (Stainless Steel)
Read moreBased on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
Gent Spare Ribbon Cable Set for Compact Panel (VCS-CABLES)
Read moreDESCRIPTION
The VCS-CABLES from Gent is a Spare Ribbon Cable set for Compact Panel Analogue Addressable Fire Alarm Panel.
-
Gent (VS-PROLL) Printer Roll For Vig and 34000
₦16,000.00Add to cartHoneywell Gent (VS-PROLL) Printer Roll For Vig and 34000
The Gent VS-PROLL is a Printer Roll For Vig and 34000.
-
Gent 013610 Basic Winmag Licenses
₦1,917,000.00Add to cartWINMAGplus has been specially developed to meet the requirements of managing and integrating hazard detection systems on a single PC platform. WINMAGplus simultaneously manages and displays graphically a number of security applications, using a common user interface including: fire detection technology; voice alarm public address; intrusion detection technology; access control technology; video technology; rescue route technology/escape door control, personnel protection systems and locating systems as well as fence monitoring systems.
-
Gent 14111-99 1102 Round Call Point Glass
Read more1411-99 from Gent is a pack of 10 Round Call Point Glasses which are are 65mm diameters x 1mm thick.
They are recommended for use with the Gent 1102 rectangular call points. These glasses do not have an anti-shatter film as they are recommended to be broken with the small hammer attached to call points.
-
Gent 14112-10 Call Point Test Key
Read moreThe 14112-10 is a replacement Test Key designed for older style Gent Manual Call Points.
-
Gent 14112-49EN Hinge Cover with Drilled Front Moulding
Read moreManual call points are manufactured from ABS with plastic covered push break glasses for safe and simple operation. No hammer is required. A polycarbonate cover version is available for applications susceptible to inadvertent operation, such as sports halls.
-
Gent 14115-KEY Spare Bulgin Key – Pack of 10
Read moreGent 14115-KEY Spare Bulgin Key – Pack of 10
A spare Bulgin Key for 14115-08 key operated (pack of 10).
For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.
Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:
- Fire Alarm Model 3225
- Fire Alarm Model 3226
- Fire Alarm Model 3228
- Fire Alarm Model 3280
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
