Popular
HORING LIH AH Q05 EN Combination Smoke and Heat Detector
- EN54-7 & EN54-5 Approval.
- The standard detector is 2-wire or 3-wire with base.
- For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
- Dual LEDs for 360-degree visibility. Bi-color LED, Stand-by Status: Green; Alarm Status: Red.
- Detector is made of high endurance, solid and colorfast Fire-proof plastic.
- Non-loosening screws on base terminal for easy installation.
- Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
Characteristics
-
- EN54-7 & EN54-5 Approval.
- The standard detector is 2-wire or 3-wire with base.
- For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
- Dual LEDs for 360-degree visibility. Bi-color LED, Stand-by Status: Green; Alarm Status: Red.
- Detector is made of high endurance, solid and colorfast Fire-proof plastic.
- Non-loosening screws on base terminal for easy installation.
- Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
-
Specification
Q05 Conventional Combination Smoke and Heat Detector
Model Q05-2 Q05-3 Q05-4 Alarm Contact N/A N/A 0.8A @30V DC, 0.4A @125V AC Voltage Range 12 ~ 30V DC Alarm Current@24V DC 470Ω 40mA 40mA 45mA Standby Current@24V DC 470Ω under 85μA Sensitivity Setting Comply to EN54 Thermal Setting 58℃ Ambient Temperature -10℃ ~ +55℃ Material Fire-proof plastic Dimensions 102mm(Dia.) x 54mm(H) Weight  130g  130g  145g Color White Effective Alert Area
Building Height Area Covered Under 4M 150 M2 4 ~ 20M 75 M2 Order Information
Q05-2 2-wire Q05-3 3-wire with remote indicator output Q05-4 4-wire with relay output Catalogue
Manual
Related products
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
C-TEC ActiV Conventional Base Voice Sounder Part No. BF454C/CC/W
Read more-
-
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Alarm Current at 30Vdc = 10mA.
- Alarm Current at 18Vdc = 8mA.
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
Zeta Fyreye MKII Diode Base
₦1,500.00Add to cartDESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
-
APOLLO DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
Read moreThe Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.
- Suitable for weatherproof applications
- Reports an alarm in under 0.2 seconds
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95 & Discovery compatible
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.