Brand: C-Tec

Showing 17–32 of 34 results

• 

  Add to wishlist

  C-TEC Power Supply Configurator Part No. BF423

  • Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
  • Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
  • Intuitive and easy-to-use with comprehensive Help files.
  • Requires a PC running Windows XP, Vista, 7 or 8.
  • Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
  • IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
  • Free software updates available via our Software Page

   Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Red Plastic Fire Panel Key

  • A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
  • Provides authorised users with access to a fire panel’s authorised user controls.
  • Finished in red polycarbonate for extra strength.
  • See tech. specs below for full panel compatibility details

  Read more Quick view
• 

  Add to wishlist

  C-TEC Remote LED Indicator Part No. BF318

  • A high-quality remote LED indicator specifically designed for use in fire alarm systems.
  • Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.
  • Ideal for indicating the activation of hidden or out of-sight fire detectors, etc.
  • Includes a white ‘write on’ area allowing installers to add equipment locations.
  • Fits on standard UK 16mm flush or surface mount back boxes.
  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Remote Status Unit, Surface Part No. EP210S

  • • • • DESCRIPTION
        • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
        • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
        • Three monitored input connections (Hold, Abort and Mode).
        • Max. 8 remote status units per EP203 panel.
        • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
        • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Retrofit Decor Plate Part No. BF-DP

  • An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.
  • Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.
  • Includes multiple mounting holes and a large cable entry section.
  • Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP.

  • • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Single Gang Locking Jack Socket for BF320 Part No. BF320JP

  • Can be used in conjunction with a BF320 vibrating pillow pad to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
  • Compatible with all C-TEC fire alarm and evacuation alert systems.
  • Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal.
  • Line monitored for disconnection via an internal 6k8Ω end of line resistor (selectable at the BF320JP).
  • Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use.
  • Can be used on systems with a 10-30V DC voltage range
  • Fits on a standard UK 25mm back box.

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24

  • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
  • Adapts to most European fixing centres – see video for further details.
  • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
  • Designed to match C-TEC’s existing plastics and colours.
  • Tough and durable.
  • Can also be surface mounted directly to a wall.

  • • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23

  • • • • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
        • Adapts to most European fixing centres – see video for further details.
        • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
        • Designed to match C-TEC’s existing plastics and colours.
        • Tough and durable.
        • Can also be surface mounted directly to a wall.

         

        • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Sounder Isolator Module (max. 30 per BF365SC) Part No. BF365IM

  • A fault isolating module with sounder drive capability designed to meet requirement 17.9.2c of Dutch standard NEN2575.
  • BSI certified to EN54 parts 17 & 18.
  • Measures just 55mm x 55mm x 16mm (will fit in the base of most conventional sounders).
  • Up to 30 BF365IM modules per BF365SC controller.
  • Allows low-cost, non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365SC Sounder Isolator Controller (subject to fire officer approval).
  • Wiring must be made in a loop arrangement, beginning and ending at the controller.
  • If a wiring fault should occur, the Module(s) nearest to the faulty section of cabling will, if needed, isolate this section. As the Modules are driven from each direction, any loss of cable integrity will have no effect on the functionality of the actual sounders.

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC STI Call Point Stopper, Flush Mount Part No. STI-6930

  • Protective cover for flush mounted manual call points.
  • Helps prevent accidental or malicious call point activation.
  • Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
  • Surface version (ST-6931) and green versions also available (see variants tab below).
  • Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.

  Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC STI Euro Call Point Stopper, Flush Mount Multi Kit with Sounder Part No. STI-15020ML

  • • Protective cover for flush mounted manual call points.
    • Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
    • Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
    • Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
    • Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
    • Surface and non-sounder variants also available (see variants tab below).
    • Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
    • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR

  • IP56 rated protective cover for flush mounted manual call points.
  • Suitable for indoor and outdoor use.
  • Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
  • Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
  • Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
  • Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.
  • Surface and non-sounder variants also available (see variants tab below).
  • Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.

  Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP

  • Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
  • Finished in 1.2mm steel.
  • Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
  • Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOX enclosure mounted alongside the PSU.

  Download datasheet

   

  Read more Quick view
• 

  Add to wishlist

  C-TEC System Line Terminator Part No. EP214

  • • • • An optional system expansion device for use with the EP203 three zone automatic extinguisher panel.
        • Ideal for terminating the EP203’s release output to a gas release solenoid or multiple metrons/igniting actuators.
        • One EP214 terminator is required per solenoid.
        • Max. 2 x EP214 terminators per EP203 (note one is supplied with the EP203).
        • Measures just 55m W x 55mm H x 22mm D.
        • Download datashee

  Read more Quick view
• 

  Add to wishlist

  C-TEC Yellow Extinguishant Release Call Point, Surface Part No. BF372

  • • • • • Certified to EN54 Part 11 (LPCB/VdS).
          • Ideal for use with C-TEC’s EP203 Automatic Extinguisher Panel.
          • Supplied with a transparent hinged cover to prevent accidental operation.
          • Includes a frangible glass element, test key and yellow back box (back box can be discarded for optional flush mounting).
          • ‘Plug & Play’ installation concept.
          • Labelled ‘Extinguishant Release’.
          • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  Fire Alarm Control Panel Mains Keyswitch Part No. BF319

  • A high-quality lockable double pole Fire Alarm Control Panel Mains Keyswitch.
  • Allows the Mains supply to a fire alarm panel to be switched on or off in accordance with BS 5839-1.
  • Ideal for use during routine test and maintenance (e.g. battery test, main board replacement etc). Note, if working on the Mains in the panel you must also follow correct practice and isolate the Mains supply at the distribution board.
  • Fits on a standard UK 47mm flush or surface mount back box.
  • Supplied with 2 x M3.5 25mm fixing screws.
  • BS EN60669-1 compliant.
  • Always read the full installation and operating instructions supplied with the unit before use.

  • Download datasheet

  Read more Quick view