• -5%
    Add to cart

    C-TEC EP203 Automatic Extinguisher Panel Part No. EP203

    • Technical Specifications

    • Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.

    • Mains supply 230V 50/60Hz.

    • Mains rated current 810mA max.

    • Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).

    • Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).

    • Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.

    • Max battery size and type 2 x 12V 7Ah VRLA connected in series.

    • No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).

    • Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).

    • No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).

    • EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).

    • Max. sounder output current 3 x 200mA.

    • Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole

      changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via

      EP212 relay card.

      Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to

      be active for 1-300 seconds and to flood for 60-1800 seconds.

      Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;

      1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.

      Indicators Multiple indicators are provided – refer to the EP203 instructions for details.

      Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual

      only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound

      sounders and scrolling.

      Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy

      status units (2 wire power + 2 wire mode select).

      Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).

      Construction & finish Metal back box; metal chassis’ plastic lid.

      IP Rating IP30.

      Weight 4.2kg (without batteries).

      Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%

    ₦ 570,000.00₦ 600,000.00
    Add to cart

    C-TEC EP203 Automatic Extinguisher Panel Part No. EP203

    ₦ 570,000.00₦ 600,000.00
  • C-TEC 1 loop REpeater Panel
    Add to cart

    C-TEC 1 Loop Repeater Panel

    Key Functions & Advantages:

    ✅ Real-Time Fire System Replication – Mirrors the main panel to deliver instant updates on alarms, faults, and system status.
    ✅ User-Friendly Interface – Intuitive LED display and controls make system monitoring and interaction simple.
    ✅ Remote Monitoring – Perfect for use in remote areas of large buildings or multiple access points.
    ✅ Secure Access – Equipped with key-operated controls to prevent unauthorized use.
    ✅ Seamless Integration – Compatible with C-TEC’s renowned range of fire alarm systems, ensuring full interoperability.
    ✅ Compact & Stylish – Sleek design that fits into modern architectural environments without taking up space.
    ✅ Cost-Effective Expansion – Reduces the need for multiple main panels while maintaining full oversight.

    ₦ 589,575.00₦ 590,000.00
    Add to cart

    C-TEC 1 Loop Repeater Panel

    ₦ 589,575.00₦ 590,000.00
  • CTEC 1 Loop Repeater Panel-7%
    Add to cart

    CTEC 1 Loop Repeater Panel – Enhance fire detection system

    ✅ Easy to install
    ✅ Compatible with CTEC 1 loop fire panels
    ✅ Ideal for multi-exit facilities and remote monitoring
    ✅ Improves response time and situational awareness
    CTEC – Trusted Fire Safety, When Every Second Counts.
    ₦ 607,950.00₦ 650,950.00
    Add to cart

    CTEC 1 Loop Repeater Panel – Enhance fire detection system

    ₦ 607,950.00₦ 650,950.00
  • CTEC 3+1 Extinguishing Panel-3%
    Add to cart

    CTEC 3+1 Extinguishing Panel – Fire Suppression Control

    ✅ Fully addressable and easy to install
    ✅ Compatible with multiple extinguishing agents
    ✅ Built-in timer delays and programmable inputs/outputs
    ✅ Clear LCD display with real-time status updates
    ✅ Approved to EN12094-1 standards
    💼 Perfect for: Data Centres | Plant Rooms | Electrical Cabinets | Server Hubs
    ₦ 610,575.00₦ 630,575.00
    Add to cart

    CTEC 3+1 Extinguishing Panel – Fire Suppression Control

    ₦ 610,575.00₦ 630,575.00
  • CTEC BOARD-1%
    Add to cart

    C-TEC 2 Loop Motherboard

    Key Functions & Advantages:

    ✅ Supports Two Detection Loops – Efficiently manages up to two addressable detection loops for expansive coverage.

    ✅ High Device Capacity – Connects to a large number of devices (e.g., detectors, call points, sounders), reducing the need for additional panels.

    ✅ Fast, Reliable Communication – Uses advanced signaling technology to ensure instant and accurate transmission of fire alerts.

    ✅ Built-in Diagnostics – Monitors system performance in real time, identifying faults and ensuring smooth operation.

    ✅ Modular & Expandable – Easily integrates with additional modules and panels, offering flexibility for growing installations.

    ✅ User-Friendly Interface – Simplifies configuration, programming, and maintenance, saving time and effort for installers.

    ✅ Certified & Compliant – Meets international safety and fire protection standards, ensuring dependable protection.

    ₦ 651,000.00₦ 655,000.00
    Add to cart

    C-TEC 2 Loop Motherboard

    ₦ 651,000.00₦ 655,000.00
  • C-TEC 2 Loop Motherboard-1%
    Add to cart

    C-TEC 2 Loop Motherboard – Fire Alarm System

    ✅ Key Functions & Features:
    • 🔄 Supports 2 Independent Detection Loops – connect and monitor hundreds of addressable devices with ease.
    • ⚡ Advanced Loop Communication Protocol – ensures fast and secure data transfer between devices.
    • 🧠 Onboard Microprocessor – delivers intelligent control and fault diagnostics in real time.
    • 🔥 Full Compatibility – works flawlessly with C-TEC’s XFP and ZFP series fire panels.
    • 🚨 Event Logging & Status Monitoring – for efficient system analysis and response.
    • 🛡️ Built-in Surge & Short-Circuit Protection – for maximum durability and system safety.
    • 🔧 Easy Installation & Maintenance – designed with engineers and installers in mind.
    ₦ 670,950.00₦ 680,950.00
    Add to cart

    C-TEC 2 Loop Motherboard – Fire Alarm System

    ₦ 670,950.00₦ 680,950.00
  • XFP 1 Loop 16 Zone Addressable Fire Panel (C-TEC CAST protocol)-1%
    Add to cart

    C-TEC 1Loop 16 Zone Panel

    Advantages and Functions:

    Advantages:

    • 🔥 Reliable Fire Protection: Quickly detects, isolates, and signals fire events with high accuracy.

    • ⚡ Single Loop Efficiency: Supports up to 16 programmable zones for streamlined monitoring.

    • 🛠️ Easy to Install & Configure: Designed for straightforward setup and minimal maintenance.

    • 📈 Expandable System: Perfect for growing facilities; scalable to meet evolving safety needs.

    • 🔒 Advanced Fault Monitoring: Immediate alert for system faults, ensuring continuous operation.

    • 🧠 User-Friendly Interface: Clear LCD display and intuitive menu for easy operation and programming.

    • 📡 Remote Alert Options: Optional integration with remote notification systems for faster response.

    • 🌍 Compliance: Meets international safety standards, offering certified assurance.

    ₦ 720,000.00₦ 730,000.00
    Add to cart

    C-TEC 1Loop 16 Zone Panel

    ₦ 720,000.00₦ 730,000.00
  • CTEC 1 Loop 16 Zone Fire Alarm Control Panel-3%
    Add to cart

    CTEC 1 Loop 16 Zone Fire Alarm Control Panel

    Key Features & Benefits:
    • ✅ Supports up to 16 zones – Easily monitor and manage multiple areas from a single, centralized panel.
    • 🔁 Single loop efficiency – Simplifies wiring and reduces installation costs.
    • 🧠 Compatible with intelligent detectors – Ensures fast, accurate fire detection and minimal false alarms.
    • 📟 User-friendly interface – Clear LED indicators and easy-to-navigate controls for rapid response.
    • 🔒 Robust and secure – Built to meet industry fire safety standards, offering peace of mind for installers and end-users alike.
    • 🔧 Easy maintenance and programming – Designed with engineers in mind for straightforward commissioning and servicing.
    ₦ 779,100.00₦ 800,000.00
    Add to cart

    CTEC 1 Loop 16 Zone Fire Alarm Control Panel

    ₦ 779,100.00₦ 800,000.00
  • C-TEC 1 loop REpeater Panel
    Add to cart

    C-TEC 2 Loop Repeater Panel

    Key Advantages & Functions:

    ✅ Real-Time Monitoring – Replicates data from the main control panel, displaying fire, fault, and system status instantly.
    ✅ User-Friendly Interface – Clear LCD display and intuitive navigation for easy system management.
    ✅ Flexible Control – Allows authorised users to silence alarms, reset systems, and more from remote locations.
    ✅ Ideal for Large Facilities – Perfect for schools, hospitals, shopping complexes, and multi-story buildings.
    ✅ Enhanced Safety Redundancy – Multiple repeater panels can be installed to ensure system visibility from several points.
    ✅ Reliable Communication – Works with industry-standard protocols and C-TEC fire alarm systems for trusted performance.

    ₦ 831,075.00₦ 832,075.00
    Add to cart

    C-TEC 2 Loop Repeater Panel

    ₦ 831,075.00₦ 832,075.00
  • CTEC 1 Loop Repeater Panel-4%
    Add to cart

    CTEC 2 Loop Repeater Panel – Fire Alarm System Expansion

    Key Benefits:
    ✅ Real-Time Fire Alarm Status – Instantly mirrors events from the main panel, helping improve response time and coordination.
    ✅ Enhanced Coverage – Ideal for use in large buildings, multi-storey complexes, hospitals, schools, and commercial facilities.
    ✅ User-Friendly Interface – Clear display and intuitive controls make it easy for staff to monitor system status with minimal training.
    ✅ Easy Installation & Integration – Simple wiring and compatibility with 2-loop systems reduce setup time and maintenance hassle.
    ✅ Durable & Reliable – Built with robust components for long-lasting performance even in demanding environments.
    ₦ 855,750.00₦ 890,750.00
    Add to cart

    CTEC 2 Loop Repeater Panel – Fire Alarm System Expansion

    ₦ 855,750.00₦ 890,750.00
  • CTEC 1 Loop Repeater Panel-10%
    Add to cart

    CTEC ZFP Repeater Panel – fire‑alarm network

    Here are the key functions and features of the CTEC ZFP Repeater Panel:
    🔧 Core Functions:
    1. Fire Alarm Display – View real-time fire alarm status from the main ZFP control panel.
    2. System Control (Level 2 access):
      • Silence Alarm
      • Reset System
      • Sound Alarms
      • Disable/Enable Devices or Zones
    3. Event Log Access – View recent events and history logs.
    4. Fault Reporting – Displays system faults and diagnostic information.
    5. Touchscreen Interface – 4.3” full-colour touchscreen for intuitive navigation and control.
    🔌 Networking & Integration:
    1. Hi-Net Network Connectivity – Connects via C-TEC’s fault-tolerant Hi-Net network.
    2. Supports Up to 64 Networked Panels/Repeaters – Ideal for large or multi-building installations.
    3. Plug-and-Play Installation – Pre-configured for easy setup with C-TEC ZFP systems.
    4. Flush or Surface Mounting – Fits into a variety of locations including reception desks, security rooms, etc.
    ⚠️ Compliance & Safety:
    1. EN54-2 & EN54-4 Approved – Fully compliant when installed with compatible power supply units.
    2. Power Status Monitoring – Shows power supply and battery health.
    This repeater panel provides localized control and real-time status updates across an entire networked fire alarm system—making it ideal for large buildings, campuses, and high-security facilities.

     

    ₦ 898,800.00₦ 998,800.00
    Add to cart

    CTEC ZFP Repeater Panel – fire‑alarm network

    ₦ 898,800.00₦ 998,800.00
  • CTEC 1-Loop-32-Zone-Addressable-Fire-Panel C-TEC 1 Loop 32 Zone Panel-1%
    Add to cart

    C-TEC 1 Loop 32 Zone Panel

    Key Advantages and Functions:
    ✅ Supports up to 32 detection zones — comprehensive coverage for your premises.
    ✅ One-loop capacity for cost-effective installations and easy maintenance.
    ✅ Fully addressable, allowing precise identification of fire or fault locations.
    ✅ LCD display for clear system status updates and fast navigation.
    ✅ Built-in event memory for detailed incident reporting and analysis.
    ✅ Programmable cause-and-effect operations for tailored system responses.
    ✅ Expandable design — easily integrates with sounders, beacons, and remote devices.
    ✅ EN54 certified, meeting international fire safety standards.
    ✅ Compact, durable enclosure suitable for various environments.
    ✅ Intuitive setup and operation, minimizing training and service time.

    ₦ 955,000.00₦ 960,000.00
    Add to cart

    C-TEC 1 Loop 32 Zone Panel

    ₦ 955,000.00₦ 960,000.00
chat with us
1
Select your currency
NGN Nigerian naira

Main Menu