Popular
Category: Addressable Manual Callpoint
The addressable manual callpoint enables users to activate the system from a single location. Each installed call point in an addressable fire alarm system has an “address.” Callpoints are essential. In the event of a fire, anyone can sound the alarm, which can mean the difference between life and death. Because of technological advancements, there are numerous call points to choose from. Modern devices include push button, resettable, and key operated models. They are of high quality, dependable, and simple to use. If a fire breaks out in your building, all necessary safety precautions are in place and fully operational.
Showing 1–16 of 28 results
-
Analogue Addressable Manual Call Points- S4-84845
₦42,000.00Add to cartDescription
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting. -
APOLLO GREEN INTELLIGENT MANUAL CALL POINT (SA5900-906APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – ORANGE (SA5900-907APO)
Read moreThe Manual Call Point is commonly used to manually control smoke vent systems.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – RED (SA5900-908APO)
Read moreThe Manual Call Point is used to manually initiate an alarm signal on the fire detection system.
- EN 54-11 & EN 54-17 Certified
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – YELLOW (SA5900-904APO)
Read moreThe Manual Call Point is commonly used to manually control extinguishant release.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO WHITE INTELLIGENT MANUAL CALL POINT – (SA5900-903APO)
Read moreThe Manual Call Point is commonly used to manually initiate a hazard alert.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
Gent S4-34805 Manual Call-Point with Resettable Element
₦26,000.00Add to cartEvery manual call point is continuously monitored ensuring a trigger is responded to in less than one second system wide.
The range includes options for glass and resettable elements and lift-up protective covers.
A key switch version is also available for areas where tampering or vandalism is expected.
An Environmentally Protected (EP) version with Ingress protection rating IP67 is also available, complete with resettable element, protective cover and backbox.
Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting.
-
Gent 14111-99 1102 Round Call Point Glass
Read more1411-99 from Gent is a pack of 10 Round Call Point Glasses which are are 65mm diameters x 1mm thick.
They are recommended for use with the Gent 1102 rectangular call points. These glasses do not have an anti-shatter film as they are recommended to be broken with the small hammer attached to call points.
-
Gent 14112-10 Call Point Test Key
Read moreThe 14112-10 is a replacement Test Key designed for older style Gent Manual Call Points.
-
Gent 14112-49EN Hinge Cover with Drilled Front Moulding
Read moreManual call points are manufactured from ABS with plastic covered push break glasses for safe and simple operation. No hammer is required. A polycarbonate cover version is available for applications susceptible to inadvertent operation, such as sports halls.
-
Gent 2.8M Venturi Tube for Duct Housing (S4-34760-28)
Read moreThe S4-34760-28 from Gent is a 2.8 Venturi Tube for use with Duct Smoke Sensors. This device shall employ a molded plastic housing with a clear viewing window and metal probes (Gent 2.8M Venturi Tube) to pick up smoke in ventilation ducts. The housing shall provide a smoke entry test point and an airflow indication. Depending on the risk and sensitivity levels required, the sensor to be fitted shall be selected from the full range of sensors available and not factory fitted. This unit is particularly suitable for sensing smoke particles in ducting which is likely to be in large quantity and flowing fairly quickly.
-
Gent K21SRS-01 Key Operated Manual Call Point
Read moreManual call points from Honeywell Gent are easy and safe to operate, with no hammer required. Fully compliant with EN 54-11, each point is manufactured from ABS and both have a break glass and resettable element. For areas susceptible to inadvertent operation – such as sports halls – a stronger, clear polycarbonate cover version is available.
-
Gent S4-34411 Interface Single Channel Output and Din Mounting Kit
₦190,000.00Add to cartGent S4-34411 Interface Single Channel Output and Din Mounting Kit
The S4-34411 from Gent is an Interface Single Channel Output and Din Mounting Kit.
Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems.
-
Gent S4-34415 Interface Output & Mains Relay & Enclosure
₦40,000.00Add to cartGent S4-34415 Interface Output & Mains Relay & Enclosure The S4-33415 is a Single Output Interface PCB with cover (Medium Voltage) in a metal box. It is a cost effective solution as all elements are included within the enclosure therefore reducing your installation and maintenance costs. Key Features Mains rated Loop powered
-
Gent S4-34895 Surface Back Box (Red) for S4-34800 Range of MCPs
₦500.00Add to cartGent S4-34895 Surface Back Box (Red) for S4-34800 Range of MCPs –
The S4-34895 is a surface mounted call point backbox which has been designed for use with the Gent Vigilon range of manual call points
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
