Popular
Category: Addressable Control Panel
The controlling component of a fire alarm system is the addressable control panel. The panel receives data from devices that detect and report fires, monitors their operation. It allows for automatic equipment management and transfer of information needed to prepare the facility for a fire.
Any related initiating device, notification appliance, control, transmitter, or relay may receive electrical energy from the panel.
One or more Signaling Line Circuits (SLC loops) ranging from one to thirty are used in an addressable fire alarm control panel. A Signaling Line Circuit can monitor and control hundreds of devices depending on the protocol used.
Some protocols allow for the use of any combination of detectors and input/output modules. Other protocols, on the other hand, allocate 50% of channel capacity to detectors/sensors and 50% to input/output modules.
Depending on the manufacturer, each SLC polls the linked devices, which can range from a few to several hundred. Multiple Signaling Line Circuits may be present in large systems.
Showing 1–16 of 42 results
-
APOLLO ISOLATOR – NEGATIVE 55000-720APO
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section
- Detects wiring short-circuits
- Minimises disruption from short-circuits
- Automatic de-isolation on the short-circuit removal
-
Gent 34701Series T Breaker(34701)
₦70,000.00Add to cartGent 34701 34000 Series T Breaker
The 34701 T-Breaker Unit allows a spur to be created from a Gent analogue addressable loop circuit.
-
Gent COMPACT-FLUSH Control Panel Flush Surround
₦250,000.00Add to cartThe Gent COMPACT-FLUSH Control Panel Flush Surround is a Gent Fire Alarm control panel flush surround. It is part of the mounting kit for the vigilon control panels.
-
GENT COMPACT-FLUSH-SS STAINLESS STEEL DOOR FOR COMPACT REPEAT
₦1,000,000.00Add to cartDescription
Gent COMPACT-FLUSH-SS Main Control Panel Stainless Steel Flush Mounting Kit
The COMPACT-FLUSH-SS is a Main Control Panel Flush Mounting Kit.
-
Gent Nano 24 – Single Loop Addressable Control Panel
₦580,000.00Add to cart- Gent Nano 24
- 127 devices per loop
- Two conventional sounder outputs.
- Fire & fault relay on board
-
GENT NANO-24 Control Panel
₦793,500.00Add to cartDescription
From installation and commissioning to
everyday use, Nano delivers an experience that
makes the fire alarm system easy to use and safe
to operate.
The appearance of the panel means that Nano
may be installed and look good in any type of
building.
Nano operates the latest range of Vigilon loop
devices from Honeywell Gent. This allows a
small system to benefit from Gent’s advanced
fi re detection technology and powered loop
performance with ranges such as SQuad and
SCubed including powerful EN5423 offering.
The Nano commissioning tool allows simple
cause and effect to be configured either offline
or online using an easy to use commissioning
tool. -
Gent NS-PLATE Spare Nameplate/Screw Cover Pack of 5
Read moreGent NS-PLATE Spare Nameplate/Screw Cover Pack of 5 – Spare/replacement nameplate and screw cover for Gent NANO Control panel
-
Gent Replacement PSU for VIG1-24 – VS-PSU-24
Read moreGent Replacement PSU for VIG1-24 – VS-PSU-24
The VS-PSU-24 is a replacement PSU for the VIG1-24 Vigilon fire panel.
-
Gent Replacement PSU for VIG1-72 – VS-PSU-72
₦1,200,000.00Add to cartGent Replacement PSU for VIG1-72 – VS-PSU-72
The VS-PSU-72 is a replacement PSU power supply for the VIG1-72 Vigilon fire panel.
-
Gent Replacement Vigilon Printer – VS-PRIN
Read moreGent Replacement Vigilon Printer – VS-PRIN
The VS-PRIN is a replacement printer assembly for the Vigilon range of control panels. This thermal printer uses Thermal Paper Rolls.
-
Gent S4-700 Detector Base
₦3,000.00Add to cartGent S4-700 Detector Base
The S4-700 Gent Vigilon Detector Base is the common detector base for the Gent S-Quad range of analogue addressable smoke and heat detectors. This base has an attractive low profile design.
-
Gent S4-720 Heat Detector
₦27,000.00Add to cartGent S4-720 Heat Detector
The S4-720 Heat Sensor is a Gent Vigilon S-Quad sensor with a unique combination of sensing elements to provide quick, intelligent fire decisions. The fully programmable heat sensor allows for significantly reduced false alarms.
-
GENT Spares Pack for Nano(NS-SPARE)
Read moreGent NS-SPAREÂ Spares Pack for Nano
The NS-SPARE is a Spares Pack for the Nano Panel.
-
Gent VCS-IDOOR-PLUS Replacement Inner Door Assembly for Compact Plus and Compact-24 Panel
₦1,900,000.00Add to cartDESCRIPTION
The VCS-IDOOR-PLUS is a complete Replacement Inner Door Assembly for Compact Plus and Compact-24 Panel.
Key Features
- Supplied in Black
-
Gent VCS-MCB-N Replacement Main Control PCB
₦770,000.00Add to cartGent VCS-MCB-N Replacement Main Control PCBÂ is a Replacement Main Control PCB for Vigilon Compact Control Panel.
-
GENT VCS-ODOOR-PLUS – REPLACEMENT OUTER DOOR FOR VIGPLUS-24/72 (BLACK)
₦190,000.00Add to cartThe Gent VCS-ODOOR-PLUS is a spare / replacement black outer door assembly for use with the Gent Vigilon Compact Plus panel.
Key Features
- Supplied in Black
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
