Popular
Category: Detection Devices
A detection device detects smoke as an indicator of a fire. As part of a fire alarm system, commercial detection devices send a signal to a fire alarm control panel. Household smoke detectors emit audible or visual alarm from the detector itself or multiple detectors. Detection devices usually housed in a plastic enclosure shaped like a disk. About 150 millimetres (6 in) in diameter and 25 millimetres (1 in) thick, but shape and size vary.
In large commercial and industrial buildings, smoke detectors typically linked to a central fire alarm system. Domestic smoke detectors range from single battery-powered units to multiple interconnected units with backup batteries.
Showing 1–16 of 69 results
-
AlarmSense Optical Smoke Detector
Read moreAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
-
APOLLO XP95 HEAT DETECTOR (A2S) 55000-420APO
Read moreThe XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.
- Reliable fire detection in areas with a wide temperature range from -20°C to +70°C
- Ideal for environments that are dirty or smoky under normal circumstances
- Unaffected by wind and atmospheric pressure
-
APOLLO XP95 MULTI-SENSOR DETECTOR (OPTICAL/HEAT) 55000-885APO
Read moreThe XP95 Multi-Sensor Detector combines independent optical smoke and temperature sensors for better fire detection in areas with deceptive phenomena.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Unaffected by wind and atmospheric pressure
- Alternative to Ionisation detectors
-
APOLLO XP95 OPTICAL SMOKE DETECTOR – BLACK 55000-660APO
Read moreThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO XP95 OPTICAL SMOKE DETECTOR 55000-600APO
₦24,500.00Add to cartThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
Combination Optical / Thermal Smoke Sensor (58 °C) (ECO1002-A)
Read moreFeatures- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy maintenance
- Remote LED Option
- Approved to EN54-7:2000 (Amendment 1)
- EN54-5:2000 (Amendment 1) Class A1R; CEA 4021
- Extended warranty
-
FS20X-211-24-6: Dual IR/UV Flame Detector (Stainless Steel)
Read moreBased on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
Gent 013610 Basic Winmag Licenses
₦1,917,000.00Add to cartWINMAGplus has been specially developed to meet the requirements of managing and integrating hazard detection systems on a single PC platform. WINMAGplus simultaneously manages and displays graphically a number of security applications, using a common user interface including: fire detection technology; voice alarm public address; intrusion detection technology; access control technology; video technology; rescue route technology/escape door control, personnel protection systems and locating systems as well as fence monitoring systems.
-
Gent 14111-99 1102 Round Call Point Glass
Read more1411-99 from Gent is a pack of 10 Round Call Point Glasses which are are 65mm diameters x 1mm thick.
They are recommended for use with the Gent 1102 rectangular call points. These glasses do not have an anti-shatter film as they are recommended to be broken with the small hammer attached to call points.
-
Gent 14112-10 Call Point Test Key
Read moreThe 14112-10 is a replacement Test Key designed for older style Gent Manual Call Points.
-
Gent 14112-49EN Hinge Cover with Drilled Front Moulding
Read moreManual call points are manufactured from ABS with plastic covered push break glasses for safe and simple operation. No hammer is required. A polycarbonate cover version is available for applications susceptible to inadvertent operation, such as sports halls.
-
Gent 14115-KEY Spare Bulgin Key – Pack of 10
Read moreGent 14115-KEY Spare Bulgin Key – Pack of 10
A spare Bulgin Key for 14115-08 key operated (pack of 10).
For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.
Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:
- Fire Alarm Model 3225
- Fire Alarm Model 3226
- Fire Alarm Model 3228
- Fire Alarm Model 3280
-
Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface
₦120,000.00Add to cartGent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface
The 19104-52 is a DIN rail mounting polarised relay designed for use with the S4-34440-02 and S4-34440-12 interface units.
-
Gent 4″ trim ring and snap-in mounting clips for IQ8Quad detector base (805574)
Read moreSnap-in mounting clips and trim ring for base installation, e.g. for installation on 4” electrical boxes.
Take note, the label plate -
Gent 781814 Conventional Remote LED
Read moreGent 781814 Conventional Remote LED Manufactured by Gent, the Conventional Remote LED 781814 is part of the new ES detect range and has been developed to work in conjunction with any Xenex Panels Red prism is continuously or pulsed illuminated by 3 LEDs. Connection by 2-wire cable to detector base. Key Features 3 continuously or …
-
Gent 805580 S-Quad Removal Tool Kit
₦158,000.00Add to cartGent 805580 S-Quad Removal Tool Kit
The 805580 from Gent is a head removal tool designed for use with the Gent S-Quad range of detector.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
