Popular
Category: Conventional Fire Alarm System
Showing 209–224 of 270 results
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF/CS90
₦9,500.00Add to cartDESCRIPTION
The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
There are 4 types of mounting base available; standard or deep and with or without diode. -
Zeta Fyreye MKII Conventional Optical Smoke Detectors (MKII-OP) c/w base
₦15,000.00Add to cartFeatures
Designed to meet EN54 requirement
Lockable to base to stop unauthorised removal
Remote LED output
Compatible with all Fyreye basesThe Fyreye MkII optical smoke detectors use
a pulsing IR LED & photodiode to detect IR
scatter caused by smoke entering the chamber.
The detector is particularly suitable for detecting
optically dense smoke, involving materials such as soft
furnishings, PVC, plastic, foam and all similar materials
which produce small visible particles (0.5 to 10μm) -
Zeta Fyreye MKII Diode Base
₦1,500.00Add to cartDESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
-
ZETA Fyreye Ultra-Violet Flame Detector (FEUV2000)
₦35,000.00Add to cart-
- Low profile shape
- The detector is solar blind and incorporates an electronic filter to eliminate unwanted alarms from naturally occurring phenomena
- Fast response time
- High immunity to electrical noise & RF interference
-
-
Zeta ID2/2/M Infinity ID2 Intelligent 2 Wire 2 Zone Fire Panel in Metal Enclosure
Read moreDESCRIPTION
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
-
Zeta ID2/4/M Infinity ID2 Intelligent 2 Wire 4 Zone Fire Panel in Metal Enclosure
Read moreDescription
Zeta Alarm Systems is proud to introduce the most
advanced
2 wire system on the market. We can now
provide
a system that gives all of the benefits associated
with
a ‘2 Wire’ installation (less cable, quicker installation,
cost savings on labour/product) and has the facility to
‘I.D.’ the devices.
The system is built on the proven communication protocol
developed by Zeta Alarm Systems and shares the same
platform as our largest, most powerful system.
The ID2 can be used for new installations, as
a retrofit for any conventional system or as a replacement for
existing
2 wire systems when the extra features are
deemed to be desirable/necessary. This is possible
because the ID2 devices sit on radial circuits, thus
making it easy to ‘upgrade’
a system with the facility to
I.D. devices without the need to re-wire.
Technical -
Zeta ID2/8/M Infinity ID2 Intelligent 2 Wire 8 Zone Fire Panel in Metal Enclosure
Read moreDESCRIPTION
Zeta Alarm Systems is proud to introduce the most advanced 2 wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices.
The system is built on the proven communication protocol developed by Zeta Alarm Systems and shares the same platform as our largest, most powerful system.
The ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2 wire systems when the extra features are deemed to be desirable/necessary. This is possible because the ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to re-wire.
-
Zeta ID2/REP/M Infinity ID2 Intelligent 2 Wire Full Function Repeater in Metal Enclosure
Read moreDESCRIPTION
The Infinity ID2 active repeater is used on an Infinity ID2 Panel.
It is powered from the ID2 Panel, so is connected via 4 cores: 2 x power and 2 x data. Op to 8 repeaters can be connected. The first 2 repeaters can be powered from the panel. Subsequent repeaters would need an external power supply.
Each repeater can be selectively configured to determine which commands it will send to the network. EG to allow some repeaters to reset the system, and others to not reset the system.
Each Repeater can also be configured to run in a different language (Although any device labels entered by the installer will just be in the language entered) -
Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
₦127,000.00Add to cartDESCRIPTION
The Infinity 8 control panel is housed in the
most attractive, modern designed, flame
retardent ABS enclosure, utilising a switch
mode power supply. It has a fully removable
front cover which improves ease of access for
cable installations.
The Infinity 8 panel can also be ordered with a metal back
box facilitating upto 7ah batteries to fit within the panel
housing. To order this version add “/M” to the end of the
model number (i.e. IN1/M, IN2/M, etc.) -
Zeta Infinity 8 Conventional 2 Zone Fire Alarm Panel IN2
₦122,500.00Add to cartDESCRIPTION
The Infinity 8 control panel is housed in the
most attractive, modern designed, flame
retardant ABS enclosure, utilising a switch
mode power supply. It has a fully removable
front cover which improves ease of access for
cable installations.
The Infinity 8 panel can also be ordered with a metal back
box facilitating upto 7ah batteries to fit within the panel
housing. To order this version add “/M” to the end of the
model number (i.e. IN1/M, IN2/M, e -
Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
₦152,000.00Add to cartDESCRIPTION
The Infinity 8 control panel is housed in the
most attractive, modern designed, flame
retardant ABS enclosure, utilising a switch
mode power supply. It has a fully removable
front cover which improves ease of access for
cable installations.
The Infinity 8 panel can also be ordered with a metal back
box facilitating upto 7ah batteries to fit within the panel
housing. To order this version add “/M” to the end of the
model number (i.e. IN1/M, IN2/M, etc -
Zeta Intrinsically Safe Flame Detector (ZIS-FLD)
Read moreTechnical Specification
- Voltage: 12 ÷ 28 V
- Max. quiescent current: 100 μA
- Alarm current at 20 V DC: 20 mA
- Detection distance: 17m max. (2nd class of sensitivity)
- View angle: 120o
- Wave detected: UV
- Operation temperature range: from -25 oC up to +55 oC
- Relative humidity: up to 95 % at 40 oC
- Colour: Black
- Dimensions: 107 dia. x 60 mm
- Weight: 0.45kg
-
Zeta Intrinsically Safe Optical Smoke Detector (ZIS-OSD)
Read moreTechnical Specification
- Voltage: 12 ÷ 28 V
- Max. monitoring mode current: ≤ 60 μA
- Alarm current: 20 mA
- Detectable test fires: TF1 to TF5 and TF8
- Operating temperature range: from -25 o C up to +55 o C
- Relative humidity: up to 95 % at 40 o C
- Colour: Black
- Dimensions with base: 115 dia. x 54 mm
- Weight: 0.15kg
-
Zeta Intrinsically Safe Programmable Heat Detector ZIS-PHD
₦90,000.00Add to cartZeta Intrinsically Safe Programmable Heat Detector The ZIS-PHD heat (temperature) detector is designed to detect a fire hazard in rooms, where during the first phase of a fire a rapid rise of temperature may occur, or where temperature may exceed a defined danger level. The ZIS-PHD is a universal heat detector, which can be programmed …
Zeta Intrinsically Safe Programmable Heat Detector ZIS-PHDRead More
-
Zeta Magnetic Door Holder 240V
Read more-
Technical Specification
- Model: ZT-DR24 / ZT-DR240
- Rated Voltage: 24V DC or 240VAC
- Rated Current: 35mA
- Switch Through AUX: Yes (with Diode)
- Needs Back EMF Diode: Yes
- Holding Force: 200 Newton
- Dimensions (Main Unit Only) (W x H x D mm): 110 x 85 x 38
- Dimensions (Keeper Plate) (W x H x D mm): 55 x 55 x 50
- Fixing Centres: 50 mm
- Weight: 404g
-
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
