Category: Fire Alarm System

Showing 17–32 of 462 results

• 

  Add to wishlist

  C-TEC FP 8 Zone Economy Conventional Fire Alarm Panel Part No. FF388-3

  ₦ 120,000.00

  • • • Installer-friendly design.
      • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
      • Eight conventional Zone circuits.
      • Two conventional Sounder circuits.
      • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
      • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
      • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
      • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
      • Multi-lingual variants (subject to quantities).
      • Space for 2 x 12V 3.2Ah VRLA batteries.
      • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
      • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
      • Download datasheet

  Add to cart Buy nowQuick view
• 

  Add to wishlist

  C-TEC IP66 Rated Enclosure for EVC302GF or EVC302F Outstations Part No. BF359/1

  • • An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
    • Includes a handle and mounting plate.
    • Measures 200 W x 302 H x 123mm deep.
    • Textured RAL 7035 (light grey) finish.
    • Also compatible with C-TEC’s EP210F remote status units.

  Read more Quick view
• 

  Add to wishlist

  C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a non-breaking plastic resettable element.
  • Includes a 470Ω resistor, test key and red back box.
  • Anti-Tamper facility.
  • Flush version (without a red back box) also available (order code BF370MFR).

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Manual ‘Crack Glass/No Break’ Call Point, flush/surface Part No. BF370FR

  • Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
  • ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
  • Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
  • Quick visible alarm indication.
  • Changeover contacts.
  • IP24 rated.

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370MR

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a non-breaking plastic resettable element.
  • Includes a 470Ω resistor, test key and red back box.
  • Anti-Tamper facility.
  • Flush version (without a red back box) also available (order code BF370MFR).

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370S

  ₦ 5,500.00

  • • Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
    • Smooth-action resettable element mimics the feel of breaking glass.
    • Supplied with a red back box, reset key and ‘Not in Use’ label.
    • Red LED ‘alarm ring’ illuminates call point face upon activation.
    • Photoluminescent operating window remains visible for up to 5 minutes.
    • Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
    • IP66 weatherproof version (order code BF370S/W) also available.
    • Download datasheet

  Add to cart Buy nowQuick view
• 

  Add to wishlist

  C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Weather resistant and sealed to IP67.
  • Ideal for use in external environments where water and dirt are likely to be present.
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a glass element.
  • Includes a 470Ω resistor and test key.
  • Anti-Tamper facility.
  • Wide -25ºC to +70ºC operating range.

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC MARINE ISOLATOR BASE [SIL2] 45681-211MAR

  The Marine Isolator Base is unique and designed to only accept the marine isolator.

  Read more Quick view
• 

  Add to wishlist

  C-TEC Output Expansion Relay Board Part No. EP212

  • • An optional system expansion device for use with the EP203 three zone automatic extinguisher panel.
    • Mounts inside the EP203 panel to provide five volt free relay contacts (reset, mode, discharged, hold and abort).
    • Reset relay switches during the panel’s reset cycle.
    • Mode relay switches when the extinguishant system’s mode is changed to manual.
    • Discharged relay switches when a released flow switch input (e.g. from the extinguishant pipework) is received to indicate the extinguishant has been released.
    • Hold relay switches when a hold input is received at the panel. If the panel is in 2nd stage alarm (i.e. it is in automatic mode and detection circuits are activated, or it is in either automatic/manual mode and a manual release input is operated) the extinguishant release sequence is halted.
    • Abort relay switches when an abort input is received at the panel to cancel the extinguishant release sequence.

  Read more Quick view
• 

  Add to wishlist

  C-TEC Power Supply Configurator Part No. BF423

  • Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
  • Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
  • Intuitive and easy-to-use with comprehensive Help files.
  • Requires a PC running Windows XP, Vista, 7 or 8.
  • Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
  • IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
  • Free software updates available via our Software Page

   Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Red Plastic Fire Panel Key

  • A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
  • Provides authorised users with access to a fire panel’s authorised user controls.
  • Finished in red polycarbonate for extra strength.
  • See tech. specs below for full panel compatibility details

  Read more Quick view
• 

  Add to wishlist

  C-TEC Remote LED Indicator Part No. BF318

  • A high-quality remote LED indicator specifically designed for use in fire alarm systems.
  • Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.
  • Ideal for indicating the activation of hidden or out of-sight fire detectors, etc.
  • Includes a white ‘write on’ area allowing installers to add equipment locations.
  • Fits on standard UK 16mm flush or surface mount back boxes.
  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Remote Status Unit, Surface Part No. EP210S

  • • • • DESCRIPTION
        • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
        • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
        • Three monitored input connections (Hold, Abort and Mode).
        • Max. 8 remote status units per EP203 panel.
        • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
        • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Retrofit Decor Plate Part No. BF-DP

  • An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.
  • Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.
  • Includes multiple mounting holes and a large cable entry section.
  • Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP.

  • • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Single Gang Locking Jack Socket for BF320 Part No. BF320JP

  • Can be used in conjunction with a BF320 vibrating pillow pad to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
  • Compatible with all C-TEC fire alarm and evacuation alert systems.
  • Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal.
  • Line monitored for disconnection via an internal 6k8Ω end of line resistor (selectable at the BF320JP).
  • Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use.
  • Can be used on systems with a 10-30V DC voltage range
  • Fits on a standard UK 25mm back box.

  • Download datasheet

  Read more Quick view
• 

  Add to wishlist

  C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24

  • Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
  • Adapts to most European fixing centres – see video for further details.
  • Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
  • Designed to match C-TEC’s existing plastics and colours.
  • Tough and durable.
  • Can also be surface mounted directly to a wall.

  • • Download datasheet

  Read more Quick view