Category: Fire Alarm System

Showing 49–64 of 564 results

• 

  wishlist

  APOLLO XPERT 7 BASE 45681-210APO

  The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

  • XPERT addressing
  • XPERT cards supplied with all bases
  • Locking feature to prevent unauthorised detector removal
  • Ideal for the XP95 and Discovery detector ranges

  Read more
• 

  wishlist

  Attached iron gate sensor

  Description Specifications Working distance ≥35mm Working voltage ≤100V Working current ≤500mA Contact mode NC/NO Case material Iron

  Read more
• 

  wishlist

  Barrier Interface Unit (for use with intrinsically safe detectors)

  • Compatible with all C-TEC manufactured conventional fire alarm panels.
  • Allows a zone of up to 10 intrinsically safe detectors and any number of manual call points to be used in hazardous environments such as gas plants.
  • Open and short circuit wiring faults on the hazardous side of the barrier shown as open circuit faults at the fire panel.

  Read more
• 

  wishlist

  C-TEC 12V 2A EN54-4 Switch Mode PSU Part No. BF560-12

  • A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Ideal for connecting to 12V security STUs to provide BS5839-1 compliant remote monitoring facilities.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF560-12/E Encased PCB version also available.

  Certified to EN54-4/A2 by the LPCB & VdS (AFNOR pending).

  • • Download datasheet

  Read more
• 

  wishlist

  C-TEC 12V 2A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-12/E

  • A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
  • Includes the same electronics as our BF560-12 LPCB certified EN54-4/A2 boxed 12V 2A PSU.
  • Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Includes a fault type & hazardous voltages present LED.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.

  Download datashee

  Read more
• 

  wishlist

  C-TEC 24V 1.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC283/2

  • A high-quality 24V 1.2Ah Valve Regulated Sealed Lead Acid battery pack.
  • Comprises 2 x 12V rechargeable batteries and a link wire.
  • Each battery measures 97 W x 50 H x 43 D mm.
  • Quick connect 4.75mm ‘Faston’ type terminals.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF560-24

  • Certified to EN54-4/A2 by the LPCB and VdS (AFNOR pending).
  • A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF560-24/E caged & BF560-24/C PCB-only versions available.

  • • Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF562-1

  • Certified to EN54-4/A2 by the LPCB and VdS.
  • A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF562-1/E Encased PCB version available.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 1.5A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-24/E

  • A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
  • Includes the same electronics as our BF560-24 LPCB certified EN54-4/A2 boxed 24V 1.5A PSU.
  • Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
  • Includes a single-pole volt-free changeover relay that switches for any fault condition.
  • Includes a fault type & hazardous voltages present LED.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.

   Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 2.3Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC284/2

  • A high-quality 24V 2.3Ah Valve Regulated Sealed Lead Acid battery pack.
  • Comprises 2 x 12V rechargeable batteries and a link wire.
  • Each battery measures 178 W x 66H x 35 D mm.
  • Quick connect 4.75mm ‘Faston’ type terminals.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 3.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC285/2

  • • • • • A high-quality 24V 3.2Ah Valve Regulated Sealed Lead Acid battery pack.
          • Comprises 2 x 12V rechargeable batteries and a link wire.
          • Each battery measures 135 W x 67 H x 67 D mm.
          • Quick connect 4.75mm ‘Faston’ type terminals.
          • Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 3A EN54-4 Switch Mode PSU Part No. BF562-3

  • Certified to EN54-4/A2 by the LPCB and VdS.
  • A powerful 24V 3A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF562-3/E encased version also available.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 3A Encased Switch Mode PSU to EN54-4/A2 Part No. BF562-3/E

  • A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
  • Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU.
  • Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
  • Includes a single-pole volt-free changeover relay that switches for any fault condition.
  • Includes a fault type & hazardous voltages present LED.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.

   Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 5A EN54-4 Switch Mode PSU Part No. BF562-5

  • Certified to EN54-4/A2 by the LPCB and VdS.
  • A powerful 24V 5A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF562-5/E encased version also available.

  • Download datasheet

   

  Read more
• 

  wishlist

  C-TEC 24V 5A Relay On A Plate Part No. BF376

  • A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.
  • Incorporates a high intensity LED which illuminates red when the relay is active.
  • Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.
  • Can be mounted on 25mm flush or surface mount back boxes.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V 7.0Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC286/2

  • A high-quality 24V 7.0Ah Valve Regulated Sealed Lead Acid battery pack.
  • Comprises 2 x 12V rechargeable batteries and a link wire.
  • Each battery measures 151 W x 98 H x 65 D mm.
  • Quick connect 4.75mm ‘Faston’ type terminals.

  Download datasheet

  Read more