Category: Fire Alarm System

Showing 65–80 of 564 results

• 

  wishlist

  C-TEC 24V BS 5446-3 Vibrating Pillow Pad Part No. BF320

  • Can be used in conjunction with a BF320JP connection plate to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
  • Vibrates and pulses on and off when triggered as per the requirements of BS 5446-3 (2015).
  • Designed to be placed under a pillow to supplement the audible and/or visual indication alerts provided by a system’s sounders and/or VADs.
  • Wide 10-30V DC voltage range means it can also be connected to many third-party connector plates (subject to testing).
  • Includes a 2m connection lead with a locking mini-XLR connector to prevent accidental removal.
  • Includes a 6K8 end-of-line monitoring resistor for fire alarm system use – see instructions for monitoring options on other systems.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC 24V Polarised Fire Bell Part No. BF336

  • A tough durable red fire bell.
  • Widely used in schools and other establishments for signalling ‘class’ or ‘shift’ changes.
  • Designed for internal use only.
  • 152mm (6 inch) x 60mm
  • Incorporates highly efficient rotary centrifugal movements to provide a high sound output of up 95dB.
  • Low current consumption.
  • Includes a multi-fixing base plate.

  Read more
• 

  wishlist

  C-TEC 24V Red Polarised Fire Bell Part No. BF336C

  • • • A robust red fire bell certified to EN54-3 by the LPCB.
      • Designed for internal use only.
      • 152mm (6 inch) x 56mm
      • Up to 97dB sound output.
      • Wide 19-27V DC operating range.
      • Low current consumption.
      • Includes a multi-fixing base plate.

  Read more
• 

  wishlist

  C-TEC 4 Zone Sounder Circuit Extender Kit Part No. FF502P

  • Provides four extra conventional sounder circuits with open and short circuit fault monitoring.
  • Compatible with most manufacturers’ fire alarm control panels.
  • Supplied on a double gang plate.
  • Basic connection requires four wires: 24 VDC, 0V, Sounder –Ve & Sounder +Ve.
  • Sounder -Ve & Sounder +Ve can be connected at the host panel or any convenient point on a sounder circuit (DO NOT SPUR). 24 VDC and 0V can be derived from the host panel or, alternatively, from an external PSU.
  • If connecting the FF502P to a C-TEC fire panel only three input control wires are required (Sounder -Ve is not required as our conventional panels have a common 0V rail).
  • Fits on standard UK 25mm flush or surface mount back boxes.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W

  • • Third-party certified to EN54-3 (Sounders).
    • Impressive 96dB(A) sound output @ 1m.
    • Includes 31 selectable primary tones and an optional secondary tone.
    • Two volume levels (high and low)
    • Alarm Current at 30Vdc = 5.5mA
    • Alarm Current at 18Vdc = 3.8mA
    • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
    • Supplied with a BF431QCP quick connect plate and detector spur wires.
    • IP21C rated.
    • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional ‘C Class’ Base VAD c/w Voice Sounder Part No. BF457C/CC/W

  • • • • Superb sound intelligibility.
        • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
        • Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
        • Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W

  • • • • Superb sound intelligibility.
        • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
        • Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
        • Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Base Voice Sounder Part No. BF454C/CC/W

  • • • Superb sound intelligibility.
      • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
      • Alarm Current at 30Vdc = 10mA.
      • Alarm Current at 18Vdc = 8mA.
      • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
      • Supplied with a BF431QCP quick connect plate and detector spur wires.
      • IP21C rated.
      • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W

  • • • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
      • Provides ‘O-R-3-2.5-17’ light distribution.
      • Ideally suited for use in corridors and other rectangular areas.
      • Impressive 96dB(A) sound output @ 1m.
      • Includes 31 selectable primary tones and an optional secondary tone.
      • Two volume levels (high and low)
      • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
      • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
      • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
      • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
      • Supplied with a BF431QCP quick connect plate and detector spur wires.
      • IP21C rated.

       

      • Download Images
      • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (deep base) Part No. BF430C/CC/DR

  • • • • • • Third-party certified to EN54-3 (Sounders).
            • Impressive 100dB(A) sound output @ 1m.
            • Includes 31 selectable primary tones and an optional secondary tone.
            • Two volume levels (high and low)
            • Alarm Current at 30Vdc = 5.5mA.
            • Alarm Current at 18Vdc = 3.8mA.
            • IP33C rated.
            • Manufactured in the UK by C-TEC.
            • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (deep base) Part No. BF430C/CC/DR (Copy)

  • • • • • • Third-party certified to EN54-3 (Sounders).
            • Impressive 100dB(A) sound output @ 1m.
            • Includes 31 selectable primary tones and an optional secondary tone.
            • Two volume levels (high and low)
            • Alarm Current at 30Vdc = 5.5mA.
            • Alarm Current at 18Vdc = 3.8mA.
            • IP33C rated.
            • Manufactured in the UK by C-TEC.
            • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (shallow base) Part No. BF430C/CC/SR

  • Third-party certified to EN54-3 (Sounders).
  • Impressive 100dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Alarm Current at 30Vdc = 5.5mA.
  • Alarm Current at 18Vdc = 3.8mA.
  • IP21C rated.
  • Manufactured in the UK by C-TEC.

  • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (deep base) Part No. BF433C/CC/DR

  • • • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
      • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as W-4-4 VAD.
      • Impressive 100dB(A) sound output @ 1m.
      • Includes 31 selectable primary tones and an optional secondary tone.
      • Two volume levels (high and low)
      • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
      • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
      • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
      • IP55C rated (weatherproof).
      • Manufactured in the UK by C-TEC.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR

  • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
  • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.
  • Impressive 100dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
  • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
  • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
  • IP21C rated.
  • Manufactured in the UK by C-TEC.

  Read more
• 

  wishlist

  C-TEC ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w Voice Sounder (deep base) Part No. BF447C/CC/DR

  • • • • Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Can also be used as a W-4-4 VAD.
        • Superb sound intelligibility.
        • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
        • Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
        • IP33C rated.
        • Manufactured in the UK by C-TEC.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC ActiV Conventional O-R-3-2.5-17 Base VAD c/w 96dB(A) Sounder Part No. BF432C/CC/W

  • • • • Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
        • Provides ‘C-3-8.5’ light distribution (min 0.4 lux over a 3 x 8.5m cylindrical area).
        • Impressive 96dB(A) sound output @ 1m.
        • Includes 31 selectable primary tones and an optional secondary tone.
        • Two volume levels (high and low)
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
        • Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more