Category: Accessories

Showing 1–16 of 56 results

• 

  wishlist

  Out of Stock

  Apollo (Fire Alarm) AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO

  • Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
  • 70d-87dB(A) sound output (visual indicator activates with sounder).
  • Certified to EN54-3 by UL International (UK) Limited.
  • Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
  • AlarmSense priority/non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detector.
  • High and low volume ranges.
  • Red and white caps available for stand-alone use.
  • Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).

  • Download datasheet

  Read more
• 

  wishlist

  Out of Stock

  APOLLO Addressable Fire Alarm SOLO 461 – CORDLESS HEAT DETECTOR TESTER

  Test and maintenance equipment for smoke, heat and CO detectors.

  Read more
• 

  wishlist

  Out of Stock

  APOLLO Fire Alarm Discovery UL Manual Pull Station – Dual Action

  The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.

  • UL38 Certified
  • Reports an alarm in under 0.2 seconds
  • Key lock
  • Easily resettable
  • Suitable for semi flush or surface mounting
  • XP95, (Discovery and CoreProtocol compatible)

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm 12V 2A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-12/E

  • A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
  • Includes the same electronics as our BF560-12 LPCB certified EN54-4/A2 boxed 12V 2A PSU.
  • Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Includes a fault type & hazardous voltages present LED.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.

  Download datashee

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm 24V 1.5A EN54-4 Switch Mode PSU Part No. BF562-1

  • Certified to EN54-4/A2 by the LPCB and VdS.
  • A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF562-1/E Encased PCB version available.

  Download datasheet

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm 24V 5A EN54-4 Switch Mode PSU Part No. BF562-5

  • Certified to EN54-4/A2 by the LPCB and VdS.
  • A powerful 24V 5A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.
  • Plastic cover on PSU PCB guards against touching live parts.
  • Includes a single-pole voltfree changeover relay that switches for any fault condition.
  • Multiple indicators – supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
  • Mains fail simulation mode.
  • Improved on-board temperature sensor with optional remote sensor.
  • Electronic functions comply with EN50131-6 grades 1-4 for security applications.
  • BF562-5/E encased version also available.

  • Download datasheet

   

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W

  • • Third-party certified to EN54-3 (Sounders).
    • Impressive 96dB(A) sound output @ 1m.
    • Includes 31 selectable primary tones and an optional secondary tone.
    • Two volume levels (high and low)
    • Alarm Current at 30Vdc = 5.5mA
    • Alarm Current at 18Vdc = 3.8mA
    • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
    • Supplied with a BF431QCP quick connect plate and detector spur wires.
    • IP21C rated.
    • Download datasheet

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm ActiV Conventional ‘C Class’ Base VAD c/w Voice Sounder Part No. BF457C/CC/W

  • • • • Superb sound intelligibility.
        • Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
        • Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
        • Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
        • Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
        • Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
        • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
        • Supplied with a BF431QCP quick connect plate and detector spur wires.
        • IP21C rated.
        • Download datasheet

  Read more
• 

  wishlist

  Out of Stock

  C-tec Fire Alarm Power Supply Configurator Part No. BF423

  • Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
  • Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
  • Intuitive and easy-to-use with comprehensive Help files.
  • Requires a PC running Windows XP, Vista, 7 or 8.
  • Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
  • IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
  • Free software updates available via our Software Page

   Download datasheet

  Read more
• 

  wishlist

  C-TECH CONVENTIONAL FIRE ALARM CFP 2 Zone Fire Alarm Panel-CFP702-2

  ₦119,000.00 ₦115,000.00

  • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
  • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
  • Manufactured by C-TEC in the UK.
  • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
  • Four conventional sounder circuits.
  • Integral 1.5A EN54-4/A2 compliant switch mode PSU.
  • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
  • Two on-board relays (Fire and Fault).
  • Two open-collector outputs (Remote and Reset).
  • ‘Class change’ and alert inputs.
  • Installer-friendly design.
  • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
  • Low 25mA quiescent current.
  • Multiple indicators.
  • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
  • Space for two x 12V 3.3Ah VRLA batteries.

  Add to cart
• 

  wishlist

  CONCEPT Solar Power Wireless Intelligent 2 PIRs Outdoor Motion Detector WL-828WF

  ₦79,000.00 ₦78,000.00

  • anti-false alarm, temperature compensation
  • Waterproof IP65

  PACKAGE

  1* PIR detector
  1* braket
  1* battery
  1* screws
  1* user manual

  CTN details:
  55*33*44cm 20pcs/ctn
  G.W.: 17kg

  Add to cart
• 

  wishlist

  Concept (Burglar Alarm) Wired PIR detector

  ₦5,500.00

  Description Specifications Detection angle 90° Detection Distance 10m Working voltage DC 9-16V Working current 18mA Alarm output NO/NC optional Environment Humidity ≤95％RH(No congelation) Operating temperature -10℃~ +50℃ Anti RFI & EMI 10MHz-1GHz 20V/m Anti-white light 100000Lux . Case Material ABS plastic . Sensitivity & pluse count adjustable

  Add to cart
• 

  wishlist

  CONCEPT TUYA WL-1201 TUYA SOCKET SMART PLUG

  ₦17,000.00 ₦15,000.00

  Smart Plug Tuya / Smart LifeVoice command Compatible With Google Home , Alexa etcInput Voltage : AC90~250VOutput Power : 900~2500WMax load

  Add to cart
• 

  wishlist

  Out of Stock

  CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

  ₦0.00

  • Product dimensions (mm)	82 W x 125 H x D 23mm.
    Weight	64g.
    Properties	Single pole changeover contacts; Rated at 1A 50V; 50V Isolation between relays, contacts and CFP & relays; 27mA active relay coil current @ 27.6V supply.

  Read more
• 

  wishlist

  Out of Stock

  Elevate Fire Safety with Gent S4-34740 Beam Sensor Pair – Advanced Technology and Compatibility

  Enhance your fire safety measures with the Gent S4-34740 Beam Sensor Pair, consisting of a Transmitter and Receiver (Bracket and Base excluded). These cutting-edge beam sensors utilize Vigilon’s loop powered technology, allowing up to 16 beam pairs on the same loop circuit, covering distances of up to 100m without the need for additional power supply …

  Elevate Fire Safety with Gent S4-34740 Beam Sensor Pair – Advanced Technology and CompatibilityRead More

  Read more
• 

  wishlist

  Out of Stock

  Elevate Fire Safety with Gent S4-34741-03 Parallel Bracket and Base: Adjustable Linear Beam Detection for Reliable Performance!

  Optimize your linear beam detection with the Gent S4-34741-03 Parallel Bracket and Base for standard applications, offering adjustable angles up to + / – 15°. This beam sensor is a market-leading solution, providing an enhanced alternative to point detection in situations where it is impractical or uneconomical. Powered and controlled via the loop, it features …

  Elevate Fire Safety with Gent S4-34741-03 Parallel Bracket and Base: Adjustable Linear Beam Detection for Reliable Performance!Read More

  Read more