Category: Manual Callpoint

The addressable manual callpoint enables users to activate the system from a single location. Each installed call point in an addressable fire alarm system has an “address.” Callpoints are essential. In the event of a fire, anyone can sound the alarm, which can mean the difference between life and death. Because of technological advancements, there are numerous call points to choose from. Modern devices include push button, resettable, and key operated models. They are of high quality, dependable, and simple to use. If a fire breaks out in your building, all necessary safety precautions are in place and fully operational.

Showing 1–16 of 17 results

wishlist

Out of Stock
APOLLO FIRE ALARM ADDRESSABLE DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
₦0.00
The Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.

Suitable for weatherproof applications

Reports an alarm in under 0.2 seconds

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95 & Discovery compatible
Read more
wishlist

Out of Stock
C-tec Fire Alarm STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR
₦0.00
IP56 rated protective cover for flush mounted manual call points.

Suitable for indoor and outdoor use.

Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.

Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.

Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.

Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.

Surface and non-sounder variants also available (see variants tab below).

Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.

Download datasheet
Read more
wishlist

Out of Stock
Elevate Fire System Connectivity with Gent VSINTSC-PCB04 – Spare PCB for S4 I/F

Gent VSINTSC-PCB04 Spare PCB for S4 Four Channel Mains Switching I/F (S4-34404)

The VSINTSC-PCB04 is a spare PCB for the S4 Four Channel Mains Switching I/F – product code: S4-34404.

The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.

Gent Low Voltage Interfaces

The standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.

Gent Mains Rated Interfaces for Vigilon Systems

For applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.

Gent Vigilon Interfaces with Metal Enclosures

There are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing. There are still units available which feature these enclosures. They can be viewed within our product portfolio.

Read more
wishlist

Out of Stock
Enhance Fire Safety with Gent S4-34807 Vigilon Key Switch Manual Call Point – Designed for Vigilon and Nano Systems!
Designed for use with Vigilon and Nano systems

Key operated

Prevents unauthorised activation

Easy to install

EN54 part 11 & 17 compliant

Key included
Read more
wishlist

Out of Stock
Gent Fire Alarm Anti-Tamper Enclosure for MCP – IP66 S4-34896

Gent S4-34896 Anti-Tamper Enclosure for MCP – IP66

The Gent S4-34896 is a weatherproof call point enclosure for use with the new style Gent Vigilon addressable call points. This enclosure allows for the Gent Vigilon Call Points to be mounted in external locations.

Read more
wishlist

Gent Fire Alarm EP IP67 Vigilon Manual Call Point with Resettable Element S4-34845
₦48,500.00

Gent S4-34805-EP IP67 Vigilon Manual Call Point with Resettable Element

The Gent S4-34805-EP is an IP67 Rated addressable manual call point designed for use with the Gent Vigilon range of analogue addressable control panels. It is IP67 rated and comes complete with resettable element, test key and a lift-up protective cover.

Add to cart
wishlist

Gent Fire Alarm Surface Back Box (Red) for S4-34800 Range of MCPsb S4-34895
₦2,000.00

Gent S4-34895 Surface Back Box (Red) for S4-34800 Range of MCPs

The S4-34895 is a surface mounted call point backbox which has been designed for use with the Gent Vigilon range of manual call points

Add to cart
wishlist

Out of Stock
Gent Fire Alarm Test Key for S4-34800 Range of MCP S4-34899
Gent S4-34899 Test Key for S4-34800 Range of MCP (Pack of 25)

The S4-34899 is a pack of call point keys for use with the new type Gent Vigilon Call Points.

These keys allow the user to perform a test on a call point without breaking the glass in the unit. They also allow the front of the call point to be removed to allow access to the terminal connections within the call point.
Read more
wishlist

Out of Stock
Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
Gent S4-34842 Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)

Every manual call point is continuously monitored ensuring a trigger is responded to in less than one second system wide.

The range includes options for glass and resettable elements and lift-up protective covers.

A key switch version is also available for areas where tampering or vandalism is expected. An Environmentally Protected (EP) version with Ingress protection rating IP67 is also available, complete with resettable element, protective cover and backbox.

Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting.
Read more
wishlist

Gent Manual Call Point with Protective Cover & Resettable Element | Fire Alarm System
₦59,000.00

Gent S4-34845 Manual Call Point with Protective Cover & Resettable Element

The S4-34845 is a Addressable Manual Call Point (MCP) from the Gent range. The S4-34845 has an response time of less than 1 second. The S4-34845 Manual Call Point comes with a protective cover and also comes with the resettable element, which can be done at any given time using a Call Point Test Key seen in the related products.

Add to cart
wishlist

Out of Stock
INTELLIGENT MANUAL CALL POINT – GREEN SA5900-906APO
The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

Out of Stock
INTELLIGENT MANUAL CALL POINT – ORANGE SA5900-907APO
The Manual Call Point is commonly used to manually control smoke vent systems.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

Out of Stock
INTELLIGENT MANUAL CALL POINT – WHITE SA5900-903APO
The Manual Call Point is commonly used to manually initiate a hazard alert.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

Out of Stock
INTELLIGENT MANUAL CALL POINT SA5900-908APO
The Manual Call Point is used to manually initiate an alarm signal on the fire detection system.

EN 54-11 & EN 54-17 Certified

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

Out of Stock
Manual ‘No Break’ Call Point, surface Part No. BF370MR
Certified to EN54 Part 11 (LPCB/VdS).

Unique ‘Plug & Play’ installation concept.

Supplied with a non-breaking plastic resettable element.

Includes a 470Ω resistor, test key and red back box.

Anti-Tamper facility.

Flush version (without a red back box) also available (order code BF370MFR).

Download datasheet
Read more
wishlist

Out of Stock
Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W
Certified to EN54 Part 11 (LPCB/VdS).

Weather resistant and sealed to IP67.

Ideal for use in external environments where water and dirt are likely to be present.

Unique ‘Plug & Play’ installation concept.

Supplied with a glass element.

Includes a 470Ω resistor and test key.

Anti-Tamper facility.

Wide -25ºC to +70ºC operating range.

Download datasheet
Read more