Popular
-
Zeta BreakGlass Yellow
Original price was: ₦ 32,000.00.₦ 31,500.00Current price is: ₦ 31,500.00.
-
Zeta Weatherproof Fire Alarm Breakglass Red
Original price was: ₦ 29,000.00.₦ 28,875.00Current price is: ₦ 28,875.00.
-
Gent Four-Channel Mains Switching Interface with Enclosure (S4-3440-02)
Original price was: ₦ 1,900,000.00.₦ 1,890,000.00Current price is: ₦ 1,890,000.00.
-
C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
Original price was: ₦ 125,000.00.₦ 120,000.00Current price is: ₦ 120,000.00.
-
SOCA SL-130 Dead Bolt Lock ( All purpose type )
Original price was: ₦ 15,000.00.₦ 13,000.00Current price is: ₦ 13,000.00.
C-TEC ActiV Optical Smoke Detector Part No. C4416
Original price was: ₦ 30,000.00.₦ 28,000.00Current price is: ₦ 28,000.00.
-
-
-
DESCRIPTION
-
A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.
-
Manufactured by C-TEC in the UK.
-
Third-party certified to EN54-5 by Intertek.
-
Wide 6-33V DC operating voltage.
-
Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
-
Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
-
- A high-quality optical smoke detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-7 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Drift compensation functionality ensures detector sensitivity is automatically calibrated to suit prevailing conditions and/or increased contamination levels allowing a greater than 8 year life-span.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
Approvals/certifications
Certified to EN54-5 by Intertek.
Application/operation
Generates an alarm condition when it detects a temperature of between 69ºC & 85ºC.
Application temperature
40°C typical, 65°C max.
Static response temperature
69°C typical, 85°C max.
Supply wiring
2-wire monitored, polarity sensitive.
Supply/operating voltage
9 to 33V DC.
Quiescent current
30µA @ 24 VDC.
Alarm voltage
6-33V DC.
Alarm current
19mA @ 12-33V DC; 11mA @ 9V DC; 2.5mA@ 6V DC.
Alarm reset voltage
Less than 1V DC (+0.5 seconds alarm reset time).
Expansion connections
Remote LED output available via ActiV base. Current source to the negative line, short-circuit protected. Max voltage 2.7V DC.
Product dimensions (mm)
102.2mm diameter x 37mm deep (detector in base); 102.2mm diameter x 57.5mm deep.
Construction & finish
White polycarbonate casing rated to UL94 V-2 with nylon parts.
IP Rating
IP42.
Weight
99g.
Related Products
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Read moreGent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Read moreOur conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Change Over Contact MCP
Read moreGent Change Over Contact is a conventional manual call point, designed to provide a manual
alarm interface to conventional fire alarm control panels. All call points
are supplied in the standard red color and are available in semi-flush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.