Gent Replacement PSU for VIG1-24 – VS-PSU-24

Related products

• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more
• 

  wishlist

  Gent by Honeywell VESDA-E VEA-40 Aspirating Smoke Detector with LED Displays(VEA-040-A00)

  combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
  They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
  multi-channel, addressable system, the VEA detector is able to divide a
  protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
  protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership.

  Read more
• 

  wishlist

  Gent Interface Programmer for S4 Interfaces on Old Systems (S4-INTERFACE-PROG)

  The S4-INTERFACE-PROG kit can be used to program the S4-Interface units to simulate legacy 344XX range of interface units. This allows the S4 interface units to be used in place of old interfaces without the need to upgrade or re-commission the system.

  Read more
• 

  wishlist

  APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)

  The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.

  • Resettable operating element
  • 170° viewable LED
  • Suitable for semi flush or surface mounting
  • ‘Plug and Play’ terminal connections for faster wiring
  • Continuity link for wiring test before commissioning
  • XP95, Discovery and CoreProtocol compatible

  Read more