Popular
Gent S4-34742 Beam Sensor Receiver
The Gent 34742 is a beam sensor / detector receiver for use with the Gent 34741 beam detector transmitter.
Vigilon’s loop powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring or interfacing.
Compatible with the full range of Vigilon and Nano control panels the S-Quad beam uses the panel software to ensure a fast response to fi re while offering software filters to reduce the number of unwanted alarms
What is a Beam Sensor?
A beam sensor works when the emitter sends out a beam of light (most often a pulsed infrared, visible red, or laser) that diffuses in all directions, filling a detection area. The target then enters the area and deflects part of the beam back to the receiver.
If anything is detected it will signal an alarm.
Key Features
- For Use With S4-34741
| Weight | 0.105 kg |
|---|---|
| Dimensions | 11.7 × 11.7 × 5.4 cm |
You may also like…
-
Gent S4-34741 Beam Sensor Transmitter
₦270,000.00Add to cartGent S4-34741 Beam Sensor Transmitter
The S4-34741 from Gent is a Beam Sensor Emitter.
Vigilon’s loop-powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring, or interfacing.
Related products
-
GENT COMPACT-FLUSH-SS STAINLESS STEEL DOOR FOR COMPACT REPEAT
₦1,000,000.00Add to cartDescription
Gent COMPACT-FLUSH-SS Main Control Panel Stainless Steel Flush Mounting Kit
The COMPACT-FLUSH-SS is a Main Control Panel Flush Mounting Kit.
-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
EXD SOUNDER TCB-0017
Read moreThe EXD Sounder has been approved for use in potentially explosive atmospheres and very harsh environmental conditions.
The unit incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.
The design allows for termination inside the enclosure. The sounder is supplied with a mounting bracket as standard.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.