Archives: Shop
Showing 273–288 of 733 results
-
GENT IP65 Electronic Sounder Red (100 dBa) – C3IP-SN-R
₦19,000.00Add to cartThe S-cubed range of alarm sounders incorporate sound, speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of two colours (red or white), with either a shallow base version sealed to IP31 or a deep base version sealed to IP55. All the low profile sounders …
GENT IP65 Electronic Sounder Red (100 dBa) – C3IP-SN-RRead More
-
GENT IP65 Electronic Sounder White – C3IP-SN-W
₦20,000.00Add to cartThe S-cubed range of alarm sounders incorporate sound, speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of two colours (red or white), with either a shallow base version sealed to IP31 or a deep base version sealed to IP55. All the low profile sounders …
-
Gent K21SRS-01 Key Operated Manual Call Point
Read moreManual call points from Honeywell Gent are easy and safe to operate, with no hammer required. Fully compliant with EN 54-11, each point is manufactured from ABS and both have a break glass and resettable element. For areas susceptible to inadvertent operation – such as sports halls – a stronger, clear polycarbonate cover version is available.
-
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Read moreOur conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
₦170,000.00Add to cartGent Key Switch Interface (Single Channel) Comes With Blue Enclosure (S4-34418)
The Gent Key Switch Interface (S4-34418) from Gent is a Single channel Key-Switch Interface which comes with a blue enclosure.
Vigilon can accommodate a high quantity of loop-powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signaling other systems in a fire, to linking with other emergency management systems such as sprinklers or security systems.
Loop-powered interfaces offer a cost-effective solution with each device individually addressed increasing the overall management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup.
-
Gent Light Shields S4-34741-99 for Beam Receiver (Pack of 5)
₦150,000.00Add to cartThe S4-34741-99 is a pack of Light Shields for Beam Receivers.
A light shield is only required to be fitted onto a beam receiver where direct sunlight or strong light is likely to fall in the path of the ‘beam receiver’. Where necessary fit the light shield.
Gent by Honeywell’s S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one-man alignment and commissioning’ which is achieved using the auto gain setting, this ensures the optimum alignment is reached.
Maintenance of the beam is enhanced with a key-operated test feature that simulates the obscuration of the beam in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 17.
-
Gent Loop Powered Interfaces- Single Input(S4-34410)
Read moreVigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems. -
Gent Loop Powered Interfaces-Single Input/Output(S4-34420-02)
₦400,000.00Add to cartDescription Gent Loop Powered Interfaces Gent Loop Powered Interfaces are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors. The Vigilon system can accommodate a high capacity of single channel interfaces on the …
Gent Loop Powered Interfaces-Single Input/Output(S4-34420-02)Read More
-
Gent Loop Powered Interfaces(VSINTM-PCB-UPG)
Read moreVigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup. -
Gent M1A-R470FG-G017-01 Flush MCP 470 Ohms
Read moreManual call points from Honeywell Gent are easy and safe to operate, with no hammer required. Fully compliant with EN 54-11, each point is manufactured from ABS and both have a break glass and resettable element. For areas susceptible to inadvertent operation – such as sports halls – a stronger, clear polycarbonate cover version is available.
-
Gent Mains Powered 4-Channel Interface 2.0Ah – S4-34440-02
₦480,000.00Add to cartGent Mains Powered 4-Channel Interface – S4-34440-02
The Gent Mains powered 4-Channel interface units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interface in various configuration modes, to control external equipment and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules on to DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
-
Gent MAINS POWERED DUA Â 60 Watt Mains Powered Distributed Amplifier (COMPACT-MAINS-DAU)
Read moreThe Gent MAINS POWERED DUA is a new addition to Compact Voice increasing the design capability and flexibility of the system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice System.
-
Gent Mains Powered Interface 12.0Ah Standby (including Batteries)- S4-34440-12
₦1,470,000.00Add to cartThe Gent Mains powered interface 12.0Ah units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery-backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
The 4 channels can be individually configured to provide Output and Input interfaces in various configuration modes, to control external equipment, and receive input to allow the fire system to make decisions and take actions. It is now possible to have combined inputs and outputs giving a total of 8 external circuits connected (e.g. 4 sector outputs and 4 confirmation inputs).
The units have room to accommodate optional modules onto DIN rails. It has a configurable auxiliary power output that is derived from its self-contained mains power supply unit, which is battery backed to continue to deliver power in the event of mains supply failure.
-
Gent Nano 24 – Single Loop Addressable Control Panel
₦580,000.00Add to cart- Gent Nano 24
- 127 devices per loop
- Two conventional sounder outputs.
- Fire & fault relay on board
-
GENT NANO-24 Control Panel
₦793,500.00Add to cartDescription
From installation and commissioning to
everyday use, Nano delivers an experience that
makes the fire alarm system easy to use and safe
to operate.
The appearance of the panel means that Nano
may be installed and look good in any type of
building.
Nano operates the latest range of Vigilon loop
devices from Honeywell Gent. This allows a
small system to benefit from Gent’s advanced
fi re detection technology and powered loop
performance with ranges such as SQuad and
SCubed including powerful EN5423 offering.
The Nano commissioning tool allows simple
cause and effect to be configured either offline
or online using an easy to use commissioning
tool. -
GENT Notifier Sounder Base Conventional NBS4
Read moreNon-Addressable Detector Base Sounder, 4 Tone, Suitable for fire detectors with 60mm mounting centres. approved to EN54-3.
If required the SC085 (white) lid to be ordered separately.
• 4 Tone Sounder
• High sound output, low current consumption
• High reliability and stable performance
• Volume control
• Lid accessory available to enable vertical installation
• Designed and approved to EN54-3
• Market specific tone set available
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
