Archives: Shop

Showing 113–128 of 733 results

• 

  wishlist

  C-TEC Double Gang Surface Interface Plate, shallow (20mm) Part No. NCP-25

  • Allows standard UK double gang plated products to be fixed to most European style back boxes (square and round variants).
  • Adapts to most European fixing centres – see video for further details.
  • Multiple variants available – options include single gang shallow (NCP-23), single gang deep (NCP-24), double gang shallow (NCP-25) and double gang deep (NCP-26).
  • Designed to match C-TEC’s existing plastics and colours.
  • Tough and durable.
  • Can also be surface mounted directly to a wall.

  Download datasheet

  Read more
• 

  wishlist

  C-TEC Economy Status Unit Part No. EP211

  ₦59,000.00

  • • • Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
      • Includes a mode (auto/manual) keyswitch.
      • Mounts on a standard UK single gang 25mm flush or surface back box.
      • Max. 8 economy status units per EP203 panel.
      • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC EFP1 Single Zone Conventional Fire Alarm Panel Part No. FF380-2

  ₦47,000.00

  • • Installer-friendly design.
    • Robust metal enclosure with heavy-duty base connections.
    • One conventional Zone circuit
    • Two conventional Sounder circuits.
    • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
    • Non-latching class change sounder output, latching fire & non-latching fault outputs (via optional expansion loom).
    • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
    • Multi-lingual variants (subject to quantities).
    • Space for 2 x 12V 2.3Ah VRLA batteries.
    • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
    • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
    • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC EP203 Automatic Extinguisher Panel Part No. EP203

  ₦169,000.00

   

  Technical Specifications
  Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
  Mains supply 230V 50/60Hz.
  Mains rated current 810mA max.
  Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
  Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
  Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
  Max battery size and type 2 x 12V 7Ah VRLA connected in series.
  No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
  Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
  No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
  EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
  Max. sounder output current 3 x 200mA.
  Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
  changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
  EP212 relay card.
  Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
  be active for 1-300 seconds and to flood for 60-1800 seconds.
  Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
  1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
  Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
  Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
  only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
  sounders and scrolling.
  Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
  status units (2 wire power + 2 wire mode select).
  Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
  Construction & finish Metal back box; metal chassis’ plastic lid.
  IP Rating IP30.
  Weight 4.2kg (without batteries).
  Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%

   

   

  Add to cart
• 

  wishlist

  C-TEC Extinguishant Hold off/Abort Button Part No. EP215

  • • • A surface or flush mounting hold or abort button designed to connect to an EP203 automatic extinguisher panel to provide a means of delaying or cancelling the extinguishant release sequence.
      • Comprises a 35mm black back box, yellow lid and green push button.
      • Supplied with two branding label options (‘Extinguishant Hold Off’ and ‘Extinguishant Abort’).
      • Actual operation depends on wiring configuration (if hold and abort functions are required, at least two EP215 buttons will be needed).
      • IP24 rated (indoor use only).
      • Download datasheet

  Read more
• 

  wishlist

  C-TEC Fire Alarm Control Panel Mains Keyswitch

  • Product dimensions (mm)	82 W x 125 H x D 23mm.
    Weight	64g.
    Properties	Single pole changeover contacts; Rated at 1A 50V; 50V Isolation between relays, contacts and CFP & relays; 27mA active relay coil current @ 27.6V supply.

  Read more
• 

  wishlist

  C-TEC Flushing Mount Remote Status Unit Part No. EP210F

  • • • • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
        • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
        • Three monitored input connections (Hold, Abort and Mode).
        • Max. 8 remote status units per EP203 panel.
        • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
        • Download datasheet

  Read more
• 

  wishlist

  C-TEC FP 14 Zone Conventional Fire Alarm Panel Part No. FF394-2

  ₦210,000.00

  • • • • • DESCRIPTION
          • Installer-friendly design.
          • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
          • 14 conventional Zone circuits.
          • Two conventional Sounder circuits.
          • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
          • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
          • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
          • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
          • Multi-lingual variants (subject to quantities).
          • Space for 2 x 12V 7Ah VRLA batteries.
          • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
          • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).

  Add to cart
• 

  wishlist

  C-TEC FP 2 Zone Conventional Fire Alarm Panel Part No. FF382-2

  ₦78,000.00

  • Installer-friendly design.
  • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
  • Two conventional Zone circuits.
  • Two conventional Sounder circuits.
  • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
  • Non-latching class change sounder output, latching fire & non-latching fault outputs (via optional expansion loom).
  • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
  • Ancillary connections for repeaters and other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
  • Multi-lingual variants (subject to quantities).
  • Space for 2 x 12V 2.3Ah VRLA batteries.
  • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
  • Designed to comply with BS 5839-4
  • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC FP 4 Zone Conventional Fire Alarm Panel (expandable to 6 zones) Part No. FF384-2

  ₦79,000.00

  • • • • Installer-friendly design.
        • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
        • Four conventional Zone circuits (expandable to 6).
        • Two conventional Sounder circuits.
        • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
        • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
        • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
        • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
        • Multi-lingual variants (subject to quantities).
        • Space for 2 x 12V 3.2Ah VRLA batteries.
        • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
        • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
        • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC FP 6 Zone Conventional Fire Alarm Panel Part No. FF386-2

  • • • Installer-friendly design.
      • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
      • Six conventional Zone circuits.
      • Two conventional Sounder circuits.
      • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
      • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
      • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
      • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
      • Multi-lingual variants (subject to quantities).
      • Space for 2 x 12V 3.2Ah VRLA batteries.
      • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
      • Designed to comply with BS 5839-4
      • Download datasheet

  Read more
• 

  wishlist

  C-TEC FP 8 Zone Conventional Fire Alarm Panel (expandable to 14 zones) Part No. FF388-2

  ₦160,000.00

  • • • • DESCRIPTION
        • Installer-friendly design
        • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
        • 12 conventional Zone circuits (expandable to 14).
        • Two conventional Sounder circuits.
        • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
        • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
        • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
        • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
        • Multi-lingual variants (subject to quantities).
        • Space for 2 x 12V 7Ah VRLA batteries.
        • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
        • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).

  Add to cart
• Sale!

  wishlist

  C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2

  ₦125,000.00 ₦120,000.00

  C-Tec CFP 8 Zone Conventional Fire Alarm Panel Ff388-2   Ff388-2 certified to EN54-2/4, C-TEC’s CFP 8 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price. Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change …

  C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2Read More

  Add to cart
• 

  wishlist

  C-TEC FP 8 Zone Economy Conventional Fire Alarm Panel Part No. FF388-3

  ₦120,000.00

  • • • Installer-friendly design.
      • Robust metal enclosure c/w lift off lid & heavy-duty base connections.
      • Eight conventional Zone circuits.
      • Two conventional Sounder circuits.
      • Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
      • Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
      • Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
      • Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
      • Multi-lingual variants (subject to quantities).
      • Space for 2 x 12V 3.2Ah VRLA batteries.
      • Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
      • Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
      • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC IP66 Rated Enclosure for EVC302GF or EVC302F Outstations Part No. BF359/1

  • • An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
    • Includes a handle and mounting plate.
    • Measures 200 W x 302 H x 123mm deep.
    • Textured RAL 7035 (light grey) finish.
    • Also compatible with C-TEC’s EP210F remote status units.

  Read more
• 

  wishlist

  C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R

  • Certified to EN54 Part 11 (LPCB/VdS).
  • Unique ‘Plug & Play’ installation concept.
  • Supplied with a non-breaking plastic resettable element.
  • Includes a 470Ω resistor, test key and red back box.
  • Anti-Tamper facility.
  • Flush version (without a red back box) also available (order code BF370MFR).

  • Download datasheet

  Read more