Popular
Gent Xenex 13270-08LB 8 Zone Conventional Fire Alarm Panel
₦184,500.00
The Gent Xenex 13270-08LB fire alarm panel is a highly cost-effective conventional option for building premises requiring coverage to four zones.
With eight alarm sounder circuits, repeater panel output, remote evacuation control and one-man test and commissioning, Xenex by Gent is a leader in conventional panel technology.
The Gent Xenex 13270-08LB fire alarm panel is a highly cost effective conventional option for building premises requiring coverage to eight zones. Certified to EN54 Parts 2 & 4, the Xenex panel contains integral power supply and battery standby capacity for up to 72hrs. (Batteries not included)
With eight alarm sounder circuits, repeat panel output, remote evacuation control and one-man test and commissioning, Xenex by Gent is a leader in conventional panel technology.
Features
- Gent Xenex 13270-08LB
- 8 conventional detection zones
- 8 sounder circuits
- 1.5A sounder circuit max load
- Conforms to EN54: parts 2 & 4
- On-board relay
- Fire and fault relay expansion card optional
- Easy configuration
- Class change input
Related products
-
Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
₦152,000.00Add to cartDESCRIPTION
The Infinity 8 control panel is housed in the
most attractive, modern designed, flame
retardant ABS enclosure, utilising a switch
mode power supply. It has a fully removable
front cover which improves ease of access for
cable installations.
The Infinity 8 panel can also be ordered with a metal back
box facilitating upto 7ah batteries to fit within the panel
housing. To order this version add “/M” to the end of the
model number (i.e. IN1/M, IN2/M, etc -
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Zeta Remote LED Indicators (MKII-RL/C & MKII-RL/W
₦9,500.00Add to cartDESCRIPTION are two models for the Conventional
Remote LED Indicator, a wall type MKII-RL/W
and ceiling mounted type (requires a base)
MKII-RL/C.
Each unit has 2 LEDs that light up to indicate an alarm. It
has the 8 LED appearance to keep it’s family identity.
The MKII-RL/W is supplied with a backbox for surface
mounting. It is also available without backbox for flush
fitting. -
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.