Gent 17800-02 Detector Base Without Diode – Flush Cabling

Related products

• 

  wishlist

  Zeta Fyreye MkII Conventional Heat Detectors MKII-HF/CS90

  ₦9,500.00

  DESCRIPTION

  The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
  temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
  There are 4 types of mounting base available; standard or deep and with or without diode.

  Add to cart
• 

  wishlist

  APOLLO AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO

  • Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
  • 70d-87dB(A) sound output (visual indicator activates with sounder).
  • Certified to EN54-3 by UL International (UK) Limited.
  • Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
  • AlarmSense priority/non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detector.
  • High and low volume ranges.
  • Red and white caps available for stand-alone use.
  • Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).

  • Download datasheet

  Read more
• 

  wishlist

  Zeta ID2/4/M Infinity ID2 Intelligent 2 Wire 4 Zone Fire Panel in Metal Enclosure

  Description
  Zeta Alarm Systems is proud to introduce the most
  advanced
  2 wire system on the market. We can now
  provide
  a system that gives all of the benefits associated
  with
  a ‘2 Wire’ installation (less cable, quicker installation,
  cost savings on labour/product) and has the facility to
  ‘I.D.’ the devices.
  The system is built on the proven communication protocol
  developed by Zeta Alarm Systems and shares the same
  platform as our largest, most powerful system.
  The ID2 can be used for new installations, as
  a retrofit for any conventional system or as a replacement for
  existing
  2 wire systems when the extra features are
  deemed to be desirable/necessary. This is possible
  because the ID2 devices sit on radial circuits, thus
  making it easy to ‘upgrade’
  a system with the facility to
  I.D. devices without the need to re-wire.
  Technical

  Read more
• 

  wishlist

  Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass

  Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

  Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

  Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

  With the addition of a hinged transparent cover the element may be protected against accidental operation.

  A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

  Read more