Popular
Gent MAINS POWERED DUA 60 Watt Mains Powered Distributed Amplifier (COMPACT-MAINS-DAU)
The Gent MAINS POWERED DUA is a new addition to Compact Voice increasing the design capability and flexibility of the system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice System.
Gent MAINS POWERED DUA
The Gent MAINS POWERED DUA is a new addition to Compact Voice increasing the design capability and flexibility of the system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining the advantages already delivered by the Compact Voice System.
- Two x 30 Watt Class D amplifiers (Maximum 60W per DAU)
- Fault tolerant amplifier hot standby as standard
- The DAU can be located anywhere on the detection loop, reducing loudspeaker cable length
- Up to 10 DAUs per Vigilon loop (20 per system)
- Fault tolerant – actions local messages if audio loop fails
- Local and independent volume adjustment of voice alarm, PA and background music
- Designed to comply with EN54 Part 16 or BS 5839 Part 8
- Internal PSU and battery standby designed to EN54 Part 4
- Microphone input for Local Emergency Microphone, Paging or background music
- 4 monitored inputs for control of VA and or Fire system, 1 auxiliary relay output for interfacing with local plant or equipment.
| Weight | 8 kg |
|---|---|
| Dimensions | 33.8 × 30.0 × 13.6 cm |
Related products
-
Zeta Fyreye MKII Diode Base
₦1,500.00Add to cartDESCRIPTION
Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors.
-
C-TEC ActiV Conventional C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W
Read more-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘O-R-3-2.5-17’ light distribution.
- Ideally suited for use in corridors and other rectangular areas.
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Read more-
-
-
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
- Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
-
C-TEC ActiV Relay Base with Diode Part No. C4408DR
Read more-
- Compatible with C-TEC’s entire range of ActiV fire detectors.
- Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output.
- Ideal for switching CCTV, security and door retaining systems.
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
- Easy to fit with lots of working space.
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
- Integrated detector/base locking mechanism, head removal tool and ID tag.
- Simple ‘click and twist’ design.
- Remote LED terminals for the optional connection to a BF318 Remote indicator.
- C4408R non-diode relay base also available for use on systems that do not require head out monitoring.
-
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.