Popular
-
Zeta BreakGlass Yellow
Original price was: ₦ 32,000.00.₦ 31,500.00Current price is: ₦ 31,500.00.
-
Zeta Weatherproof Fire Alarm Breakglass Red
Original price was: ₦ 29,000.00.₦ 28,875.00Current price is: ₦ 28,875.00.
-
Gent Four-Channel Mains Switching Interface with Enclosure (S4-3440-02)
Original price was: ₦ 1,900,000.00.₦ 1,890,000.00Current price is: ₦ 1,890,000.00.
-
C-Tec FP 8 Zone Conventional Fire Alarm Panel-Ff388-2
Original price was: ₦ 125,000.00.₦ 120,000.00Current price is: ₦ 120,000.00.
-
SOCA SL-130 Dead Bolt Lock ( All purpose type )
Original price was: ₦ 15,000.00.₦ 13,000.00Current price is: ₦ 13,000.00.
Zeta ID2/REP/M Infinity ID2 Intelligent 2 Wire Full Function Repeater in Metal Enclosure
DESCRIPTION
The Infinity ID2 active repeater is used on an Infinity ID2 Panel.
It is powered from the ID2 Panel, so is connected via 4 cores: 2 x power and 2 x data. Op to 8 repeaters can be connected. The first 2 repeaters can be powered from the panel. Subsequent repeaters would need an external power supply.
Each repeater can be selectively configured to determine which commands it will send to the network. EG to allow some repeaters to reset the system, and others to not reset the system.
Each Repeater can also be configured to run in a different language (Although any device labels entered by the installer will just be in the language entered)
Zeta ID2/REP/M Infinity ID2 Intelligent 2 Wire Full Function Repeater in Metal Enclosure
The Infinity ID2 active repeater is used on an Infinity ID2 Panel.
It is powered from the ID2 Panel, so is connected via 4 cores: 2 x power and 2 x data. Op to 8 repeaters can be
connected. The first 2 repeaters can be powered from the panel. Subsequent repeaters would need an external
power supply.
Each repeater can be selectively configured to determine which commands it will send to the network. EG to
allow some repeaters to reset the system, and others to not reset the system.
Each Repeater can also be configured to run in a different language (Although any device labels entered by the
installer will just be in the language entered)
The repeater shows Alarms and faults from the fire panel. It does not show disablements or test mode events.
The repeater can be configured to start panel sounders, stop panel sounders, Silence panel Buzzers and reset the
panel. The repeater can not interrogate panel configuration or device status. The repeater can not select
disablements or test mode.
Key Features:
- The system meets the full requirements of BSEN5839 parts 1 and 6.
- The control panel has been designed to meet EN54 parts 2 and 4.
- Each device can be uniquely identified by the panel
- Device Count Verification
- Alarm Verification
- 2048 Event History
- ID2 Smartphone App available for iOS and Android
- Cable Break protection
- Cable Short Circuit Protection
- Includes zonal LEDs and LCD display
- 4 cores required from ID2 panel (2 data + 2 power)
- Can powered from 24V auxiliary PSU in the ID2 panel
1 Enclosure specifications
DESCRIPTION VALUE
ENCLOSURE SIZE 364 x 302 x 90 mm
TOP CABLE ENTRIES 15 x 19mm DIA ENTRIES
9.2 Electrical specifications
ELECTRICAL DESCRIPTION VALUE
SUPPLY VOLTAGE 29V DC Nominal (19 to 30V DC)
OPERATING CURRENT 40mA typical
AUXILIARY FAULT OUTPUT 1 x FAULT RELAY SELV@1A (NORM. ENERG)
MAX NUMBER OF REPEATERS PER SYSTEM 8
REPEATER CONNECTION RS485
| Dimensions | 36.4 × 30.2 × 9.0 cm |
|---|
Related Products
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Read moreGent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Read moreOur conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Change Over Contact MCP
Read moreGent Change Over Contact is a conventional manual call point, designed to provide a manual
alarm interface to conventional fire alarm control panels. All call points
are supplied in the standard red color and are available in semi-flush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.