Popular
Zeta Smart Connect Touchscreen 1 Loop Addressable Fire Alarm Panel
₦548,000.00
DESCRIPTION
The SmartConnect is a fully featured single loop
addressable fire alarm panel with a user friendly 4.3 inch
touch screen display and remote monitoring via a desktop
PC or smartphone via the cloud.
The panel is housed in an attractive, modern designed,
flame retardent ABS enclosure, utilising a switch mode
power supply and has a fully removable front cover which
improves ease of access for cable installations. Up to 64
panels can be networked (pier to pier) with no additional
network cards.
DESCRIPTION
The SmartConnect is a fully featured single loop
addressable fire alarm panel with a user friendly 4.3 inch
touch screen display and remote monitoring via a desktop
PC or smartphone via the cloud.
The panel is housed in an attractive, modern designed,
flame retardent ABS enclosure, utilising a switch mode
power supply and has a fully removable front cover which
improves ease of access for cable installations. Up to 16
panels can be networked (pier to pier) with no additional
network cards.
Features
4.3 inch colour touch
screen display
Remote monitoring
via a desktop PC or
smartphone via the
cloud
Easy to use
configuration software
Full cause & effect
programming via front
panel or PC
250 Zeta MKII protocol
devices per loop
250 available zones,
16 with LED indication
Built-in TCP-IP output
Up to 8 password
protected users
Meets all requirements
of latest EN54 parts 2
& 4
Extensive Day/Night
mode programming
Built-in network facility
2 programmable local
inputs
2 sounder circuits
Fire &
Technical Specification
Model SMART1
Part No 37-350
Mains Voltage 230V AC +10% / -15% @ 50/60 Hz
System Voltage 24V DC (Nominal)
Loop Current 500mA
Sounder Alarm Output 2 x 200mA @ 24V DC
Fault Relay 1 x Volt Free Relay, SELV @ 1A Max
Fault Relay 1 x Volt Free Relay, SELV @ 1A Max
Loop Capacity 250 MKII devices
Charger Voltage 27.6V
Battery cut off Battery voltage less than 20V
Battery Internal Resistance limit 2.0 ohm
Enclosure size 370 x 311 x 113 (mm)
Weight 3.5Kg
Maximum battery space 2 x 7.0 Ah, 12 Vdc sealed lead acid
IP Rating IP30
| Weight | 3.5 kg |
|---|---|
| Dimensions | 37.0 × 31.1 × 11.3 cm |
Related products
-
Gent CWST-RW-S5 VAD Red Base – White Flash
Read moreCWST-RW-S5 features high output LEDs, advanced optics and an innovative lens design, providing outstanding Omni-directional light coverage at low current draw. Specifically designed for, and approved to meet EN54-23. The CWST-RW-S5 delivers outstanding quality, reliability and long operational life.
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF/CS90
₦9,500.00Add to cartDESCRIPTION
The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
There are 4 types of mounting base available; standard or deep and with or without diode. -
Gent by Honeywell Vesda-E VEA-40 Aspirating Smoke Detector with 3.5” TouchScreen Display(VEA-040-A10)
Read moreVesda-E VEA-40 Aspirating Smoke Detector
combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
APOLLO ISOLATOR – NEGATIVE 55000-720APO
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section
- Detects wiring short-circuits
- Minimises disruption from short-circuits
- Automatic de-isolation on the short-circuit removal
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.