Popular
Zeta Smart Connect Touchscreen 1 Loop Addressable Fire Alarm Panel
₦548,000.00
DESCRIPTION
The SmartConnect is a fully featured single loop
addressable fire alarm panel with a user friendly 4.3 inch
touch screen display and remote monitoring via a desktop
PC or smartphone via the cloud.
The panel is housed in an attractive, modern designed,
flame retardent ABS enclosure, utilising a switch mode
power supply and has a fully removable front cover which
improves ease of access for cable installations. Up to 64
panels can be networked (pier to pier) with no additional
network cards.
DESCRIPTION
The SmartConnect is a fully featured single loop
addressable fire alarm panel with a user friendly 4.3 inch
touch screen display and remote monitoring via a desktop
PC or smartphone via the cloud.
The panel is housed in an attractive, modern designed,
flame retardent ABS enclosure, utilising a switch mode
power supply and has a fully removable front cover which
improves ease of access for cable installations. Up to 16
panels can be networked (pier to pier) with no additional
network cards.
Features
4.3 inch colour touch
screen display
Remote monitoring
via a desktop PC or
smartphone via the
cloud
Easy to use
configuration software
Full cause & effect
programming via front
panel or PC
250 Zeta MKII protocol
devices per loop
250 available zones,
16 with LED indication
Built-in TCP-IP output
Up to 8 password
protected users
Meets all requirements
of latest EN54 parts 2
& 4
Extensive Day/Night
mode programming
Built-in network facility
2 programmable local
inputs
2 sounder circuits
Fire &
Technical Specification
Model SMART1
Part No 37-350
Mains Voltage 230V AC +10% / -15% @ 50/60 Hz
System Voltage 24V DC (Nominal)
Loop Current 500mA
Sounder Alarm Output 2 x 200mA @ 24V DC
Fault Relay 1 x Volt Free Relay, SELV @ 1A Max
Fault Relay 1 x Volt Free Relay, SELV @ 1A Max
Loop Capacity 250 MKII devices
Charger Voltage 27.6V
Battery cut off Battery voltage less than 20V
Battery Internal Resistance limit 2.0 ohm
Enclosure size 370 x 311 x 113 (mm)
Weight 3.5Kg
Maximum battery space 2 x 7.0 Ah, 12 Vdc sealed lead acid
IP Rating IP30
| Weight | 3.5 kg |
|---|---|
| Dimensions | 37.0 × 31.1 × 11.3 cm |
Related products
-
APOLLO GREEN INTELLIGENT MANUAL CALL POINT (SA5900-906APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
Texecom EXD Buzzer TCA-0005
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions. -
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Read moreGent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Gent Single Mode Fibre Network Card (VIG-NC-SMF)
₦440,000.00Add to cartThe Single Mode Fibre Network Card (VIG-NC-SMF) allows a fast and reliable network over distances of up to 20km between Vigilon Plus Panels (VIGPLUS-24, VIGPLUS-72) / Network Nodes (VIGPLUS-NODE).
The Single Mode Fibre Network card is designed to plug into the backplane of a panel or node in dedicated slots.
Fibre optic connects directly to the sockets on the card.
Up to 31 panels/nodes on a single network.
Up to 200 panels/nodes on a complex networks.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.