Popular
Zeta Beam Xtra Motorised Reflective Beam Smoke Detector c/w extender Kit
₦504,500.00
DESCRIPTION
Developed to overcome the problems of
old outdated technology in beam detection,
this motorised beam now means that beam
detection can be used reliably to produce cost
effective solutions for protecting large open
areas.
DESCRIPTION
Developed to overcome the problems of
old outdated technology in beam detection,
this motorised beam now means that beam
detection can be used reliably to produce cost
effective solutions for protecting large open
areas.
Features
motorised head unit
controller unit (mounted at low level)
designed to comply with en54 part 12
compatible with most major fire panels
very low power consumption
uses only 3ma at all times
vds approved
supply voltage 10… to 30 vdc
supply current 3.5ma (constant current) in all operational states
constant current 17ma (constant current) in fast commissioning
temperature -10°c to +55°c
humidity 10 to 95% rh non-condensing
protection index ip65 when suitably mounted and terminated
dimensions
head:
(h) 180mm
(w) 155mm
(d) 137mm
controller:
(h) 185mm
(w) 120mm
(d) 62mm
(h) 293mm x (w) 293mm
x
(d) 5mm
(h) 394mm x (w) 394mm
x
(d) 5mm
weight 1.1kg 0.55kg 0.8kg 1.8kg
optical wavelength 870mm
maximum angular alignment ±5°
maximum angular misalignment
| Weight | 1.1 kg |
|---|---|
| Dimensions | 13.7 × 15.5 × 18.0 cm |
Related products
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF/CS90
₦9,500.00Add to cartDESCRIPTION
The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
There are 4 types of mounting base available; standard or deep and with or without diode. -
GENT COMPACT-FLUSH-SS STAINLESS STEEL DOOR FOR COMPACT REPEAT
₦1,000,000.00Add to cartDescription
Gent COMPACT-FLUSH-SS Main Control Panel Stainless Steel Flush Mounting Kit
The COMPACT-FLUSH-SS is a Main Control Panel Flush Mounting Kit.
-
Gent Surface MCP (XENS-805) 470 Ohms Re-settable
₦10,000.00Add to cartGent XENS-805 Surface MCP 470 Ohms Re-settable Gent Surface MCP (XENS-805) 470 Ohms Re-settable requires no hammer and is easy and safe to operate. Gent’s conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are …
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.