- You cannot add that amount of "CTEC/Context Plus Addressable Breakglass Unit – Intelligent Fire Alarm" to the cart because there is not enough stock (0 remaining).
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOX enclosure mounted alongside the PSU.
-
C-TEC Sounder Isolator Module (max. 30 per BF365SC) Part No. BF365IM
- A fault isolating module with sounder drive capability designed to meet requirement 17.9.2c of Dutch standard NEN2575.
- BSI certified to EN54 parts 17 & 18.
- Measures just 55mm x 55mm x 16mm (will fit in the base of most conventional sounders).
- Up to 30 BF365IM modules per BF365SC controller.
- Allows low-cost, non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365SC Sounder Isolator Controller (subject to fire officer approval).
- Wiring must be made in a loop arrangement, beginning and ending at the controller.
- If a wiring fault should occur, the Module(s) nearest to the faulty section of cabling will, if needed, isolate this section. As the Modules are driven from each direction, any loss of cable integrity will have no effect on the functionality of the actual sounders.
-
C-TEC Remote LED Indicator Part No. BF318
- A high-quality remote LED indicator specifically designed for use in fire alarm systems.
- Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.
- Ideal for indicating the activation of hidden or out of-sight fire detectors, etc.
- Includes a white ‘write on’ area allowing installers to add equipment locations.
- Fits on standard UK 16mm flush or surface mount back boxes.
- Download datasheet
-
C-TEC Single Gang Locking Jack Socket for BF320 Part No. BF320JP
- Can be used in conjunction with a BF320 vibrating pillow pad to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
- Compatible with all C-TEC fire alarm and evacuation alert systems.
- Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal.
- Line monitored for disconnection via an internal 6k8Ω end of line resistor (selectable at the BF320JP).
- Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use.
- Can be used on systems with a 10-30V DC voltage range
- Fits on a standard UK 25mm back box.
-
C-TEC MARINE ISOLATOR BASE [SIL2] 45681-211MAR
The Marine Isolator Base is unique and designed to only accept the marine isolator.
-
FS20X-211-24-6: Dual IR/UV Flame Detector (Stainless Steel)
Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
C-TEC Conventional Sounder
Key Features
* High Sound Output – Produces up to *100 dB(A)* at 1 metre for maximum audibility.
* Multiple Alarm Tones – Choose from **31 selectable tones** to suit your building’s fire alarm standard.
* Dual Volume Control – High or low volume options for different noise environments.
* Visual Alarm Option (VAD Models) – Selectable flash rates for areas requiring both audible and visual alerts.
* Low Current Consumption – Energy-efficient design allows more devices on the same circuit.
* Strong Build Quality – Durable enclosure with IP21C protection (varies by model).
* Easy Installation – Compatible with most conventional fire alarm panels, including C-TEC CFP and FP systems.
* Certified Safety – EN 54-3 (Sounder) and EN 54-23 (VAD) approved.₦ 10,500.00₦ 11,000.005% offC-TEC Conventional Sounder
₦ 10,500.00₦ 11,000.005% off -
C-TEC ActiV Optical Smoke Detector Part No. C4416
-
-
-
DESCRIPTION
-
A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.
-
Manufactured by C-TEC in the UK.
-
Third-party certified to EN54-5 by Intertek.
-
Wide 6-33V DC operating voltage.
-
Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
-
Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
-
₦ 28,000.00₦ 30,000.00C-TEC ActiV Optical Smoke Detector Part No. C4416
₦ 28,000.00₦ 30,000.00 -
-
CTEC/Context Plus Addressable Breakglass Unit – Intelligent Fire Alarm
✅ Key Features & Functions:
-
🔘 Addressable Technology – Communicates directly with the fire panel for precise zone identification.
-
🧠 Unique ID Programming – Each unit has a programmable address for easy system integration and fault tracing.
-
🔄 Resettable Mechanism – No need to replace glass after activation; simply reset and reuse.
-
🔥 Manual Activation – Allows users to manually trigger the fire alarm system in the event of an emergency.
-
🟢 LED Status Indicator – Shows activation and communication status at a glance.
-
🛠️ Easy Installation – Designed for quick surface or flush mounting.
-
🧱 Durable Construction – Tough, impact-resistant casing built for high-traffic areas.
₦ 75,075.00₦ 77,075.00CTEC/Context Plus Addressable Breakglass Unit – Intelligent Fire Alarm
₦ 75,075.00₦ 77,075.00 -
-
C-TEC Input Output Unit
Boost Your Fire Alarm System’s Performance with the C-TEC Input/Output Unit
Engineered for flexibility and seamless integration, the C-TEC Input/Output Unit is the ideal solution for interfacing your fire detection system with other essential building controls. Whether you’re activating door release mechanisms, shutting down HVAC systems, or monitoring third-party equipment, this unit delivers unmatched reliability and intelligent control.🔧 Key Functions & Advantages:
-
🔄 Interfaces third-party equipment with your fire alarm system
-
⚡ Supports both input monitoring and output triggering in one compact device
-
🔐 Provides secure and reliable signal processing
-
🏢 Ideal for building automation tasks (e.g., elevator recall, smoke vent control)
-
🔧 Easy to install, configure, and maintain
-
🔋 Compatible with most modern addressable fire alarm panels
Trusted by professionals across commercial, industrial, and residential facilities, the C-TEC Input/Output Unit is your go-to choice for enhanced safety automation.
💼 Available now
₦ 84,000.00₦ 85,000.00C-TEC Input Output Unit
₦ 84,000.00₦ 85,000.00 -
chat with us