- You cannot add that amount of "C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel" to the cart because there is not enough stock (0 remaining).
-
C-TEC Red Plastic Fire Panel Key
- A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels.
- Provides authorised users with access to a fire panel’s authorised user controls.
- Finished in red polycarbonate for extra strength.
- See tech. specs below for full panel compatibility details
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOXÂ enclosure mounted alongside the PSU.
-
C-TEC Power Supply Configurator Part No. BF423
- Allows C-TEC’s BF560 and BF562 range of boxed, caged and PCB-only EN54-4/A2 Power Supplies to be optionally customised to suit an application.
- Configurable PSU parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Input/Output settings.
- Intuitive and easy-to-use with comprehensive Help files.
- Requires a PC running Windows XP, Vista, 7 or 8.
- Includes a Configurator, software CD, mini-USB to standard-USB connection lead and a 1.3mm to 1.3mm connection lead c/w adaptor.
- IMPORTANT: Changing a PSU’s parameters will render its EN54-4/A2 approval obsolete and any changes must be tested by the responsible person for correct operation.
- Free software updates available via our Software Page
-
C-TEC Retrofit Decor Plate Part No. BF-DP
- An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.
- Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.
- Includes multiple mounting holes and a large cable entry section.
- Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP.
-
C-TEC Yellow Extinguishant Release Call Point, Surface Part No. BF372
-
-
-
-
- Certified to EN54 Part 11 (LPCB/VdS).
- Ideal for use with C-TEC’s EP203 Automatic Extinguisher Panel.
- Supplied with a transparent hinged cover to prevent accidental operation.
- Includes a frangible glass element, test key and yellow back box (back box can be discarded for optional flush mounting).
- ‘Plug & Play’ installation concept.
- Labelled ‘Extinguishant Release’.
-
-
-
-
-
C-TEC STI Call Point Stopper, Flush Mount Part No. STI-6930
- Protective cover for flush mounted manual call points.
- Helps prevent accidental or malicious call point activation.
- Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
- Surface version (ST-6931) and green versions also available (see variants tab below).
- Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W
- Certified to EN54 Part 11 (LPCB/VdS).
- Weather resistant and sealed to IP67.
- Ideal for use in external environments where water and dirt are likely to be present.
- Unique ‘Plug & Play’ installation concept.
- Supplied with a glass element.
- Includes a 470Ω resistor and test key.
- Anti-Tamper facility.
- Wide -25ºC to +70ºC operating range.
-
C-TEC STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR
- IP56 rated protective cover for flush mounted manual call points.
- Suitable for indoor and outdoor use.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC STI Euro Call Point Stopper, Flush Mount Multi Kit with Sounder Part No. STI-15020ML
-
- Protective cover for flush mounted manual call points.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
-
-
C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).