-
Gent Flush Manual Call Point (XENS-850) 470 Ohms Glass
Gent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent Flush Manual Call Point are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
-
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent XENS-829 Weatherproof Manual Call Point 470 Ohms Resistor Glass
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fi re alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
-
S-Cubed
S-Cubed offers a comprehensive range of loop powered alarm
sounders with integrated voice and EN54-23 certified visual
alarms. Combined with flexible configuration from the fire
control panels, this loop powered device can give a differentiated
combination of audible and visual alarms for alert and general
evacuation. -
Gent by Honeywell VESDA-E VEA-40 Aspirating Smoke Detector with LED Displays(VEA-040-A00)
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.
They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
Gent by Honeywell Vesda-E VEA-40 Aspirating Smoke Detector with 3.5” TouchScreen Display(VEA-040-A10)
Vesda-E VEA-40 Aspirating Smoke Detector
combines VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.They use patented air sampling points and multichannel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a
multi-channel, addressable system, the VEA detector is able to divide a
protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response. The detectors are suitable for
protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership. -
Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)
DESCRIPTION
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
VESDAnet™
VESDA detectors and devices communicate on VESDAnet which provides a
robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
ETHERNET AND WIFI CONNECTIVITY
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
wirelessly to the detector via the network.
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors -
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB)
Description
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB) is a housing for Vigion’s loop powered interfaces. Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems. Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems. Loop powered interfaces offer a cost effective solution with each device individually addressed increasing the overal management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup. -
Gent Loop Powered Interfaces- Single Input(S4-34410)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems. -
Gent Loop Powered Interfaces(VSINTM-PCB-UPG)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup. -
Gent by Honeywell FS20X Dual IR/UV Flame Detector (Aluminum) FS20X-211-23-6
Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
FS24X-911-23-6: QuadBand™ IR3+ Detector (Aluminum)
FS24X provides wideband Multi-Spectrum Triple IR (IR/IR/IR/Visible) flame detection. It is part of our FSX family of
advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and
Visible detection technology, the FS24X sets the standard for flame detection. Sophisticated software algorithms and dual
microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm
rejection.
The WideBand IR™ Infrared technology using high-speed solid-state Quantum sensors allows detection of all types of fires,
hydrocarbon and non-hydrocarbon, in all weather conditions.
- Personal Protection
- Garrett
- Paxton
- Proximity Reader
- Proximity
- Proximity Card
- Proximity Reader
- PAXTON PROXIMITY 10 CARD PACK – GREEN, AMBER OR RED
- PAXTON CARDLOCK READER – SATIN CHROME
- PAXTON SWITCH 2 CONTROLLER
- PAXTON NET2 ENTRY MONITOR
- PAXTON ENTRY STANDARD PANEL – SURFACE MOUNT
- PAXTON NET2 ENTRY PREMIUM MONITOR – SURFACE MOUNT
- PAXTON NET2 ENTRY TOUCH PANEL SURFACE MOUNT
- PAXTON READER CABLE – HALOGEN FREE 10 CORE 100m
- PAXTON 12V 2A DC POWER SUPPLY PLASTIC CABINET
- PAXTON NET2 DESKSTOP READER, USB
- PAXTON NET 2 SOFTWARE PROFESSIONAL
- PAXTON NET2 PROXIMITY ISO CARDS – Without magstripe, per one
- PAXTON NET2 AIR BRIDGE
- PAXTON NET2 PLUS 1DOOR CONTROLLER – 12V 2A PSU, PLASTIC CABINET 682-531
- Paxton Net2 Plus 1 door controller (682-493 -EX)
- PAXTON Entry VR Panel – flush mount (337-500EX)
- PAXTON NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET 682-284
- PAXTON NET2 P50 PROXIMITY READERS(353-110 EX)
- Zeta
- Soca
- Solo
- SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
- Solo 100 Telescopic Access Pole
- Solo 111 Urban 0.5m Extension Pole
- Solo 110 Urban Telescopic Pole 1.75 Metres
- SOLO Testifier Smoke/Heat Detector TESTIFIRE1001-001
- Solo 330 Aerosol Smoke and CO Dispenser
- Solo 365 Electronic Smoke Detector Tester KITS
- Solo 200 – Universal Detector Removal Tool
- Solo 461-00 Cordless Heat Detector Heat Only
- Solo A5 Smoke Detector Tester Aerosol 250ml (Flammable)
- Gent
- C-Tec
- Ei Electronics
