Products below 1kg
-
-
C-TEC Single Gang Locking Jack Socket for BF320 Part No. BF320JP
- Can be used in conjunction with a BF320 vibrating pillow pad to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
- Compatible with all C-TEC fire alarm and evacuation alert systems.
- Locking mini-XLR connector and plug arrangement helps prevent accidental pillow pad removal.
- Line monitored for disconnection via an internal 6k8Ω end of line resistor (selectable at the BF320JP).
- Selectable 6K8 (pillow pad) or 27K (jack socket) end of line monitoring options for fire alarm or evacuation alert system use.
- Can be used on systems with a 10-30V DC voltage range
- Fits on a standard UK 25mm back box.
-
C-TEC Remote LED Indicator Part No. BF318
- AÂ high-quality remote LED indicator specifically designed for use in fire alarm systems.
- Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active.
- Ideal for indicating the activation of hidden or out of-sight fire detectors, etc.
- Includes a white ‘write on’ area allowing installers to add equipment locations.
- Fits on standard UK 16mm flush or surface mount back boxes.
- Download datasheet
-
C-TEC Sounder Isolator Module (max. 30 per BF365SC) Part No. BF365IM
- A fault isolating module with sounder drive capability designed to meet requirement 17.9.2c of Dutch standard NEN2575.
- BSI certified to EN54 parts 17 & 18.
- Measures just 55mm x 55mm x 16mm (will fit in the base of most conventional sounders).
- Up to 30 BF365IM modules per BF365SC controller.
- Allows low-cost, non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365SC Sounder Isolator Controller (subject to fire officer approval).
- Wiring must be made in a loop arrangement, beginning and ending at the controller.
- If a wiring fault should occur, the Module(s) nearest to the faulty section of cabling will, if needed, isolate this section. As the Modules are driven from each direction, any loss of cable integrity will have no effect on the functionality of the actual sounders.
-
C-TEC STU Mounting Plate for BF360/12 or BF560/12 12V 2A PSU Part No. BF360SP
- Facilitates the mounting of a third-party Subscriber Terminal Unit (STU) in a BF360-12 or BF560/12 12V 2A PSU.
- Finished in 1.2mm steel.
- Accessory pack includes installation instructions, mounting screws, fixing pads, cable clip and cable tie.
- Can also be used with a BF360-24 or BF560-24 1.5A 24V PSU by using an ancillary BF360BOXÂ enclosure mounted alongside the PSU.
-
C-TEC Single Gang Surface Interface Plate, shallow (20mm) Part No. NCP-23
-
-
-
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
-
-
-
C-TEC Single Gang Surface Interface Plate, deep (25mm) Part No. NCP-24
- Allows standard UK single gang plated products to be fixed to most European style back boxes (square and round variants).
- Adapts to most European fixing centres – see video for further details.
- Multiple variants available – options include single gang shallow (NCP23), single gang deep (NCP24), double gang shallow (NCP25) and double gang deep (NCP26).
- Designed to match C-TEC’s existing plastics and colours.
- Tough and durable.
- Can also be surface mounted directly to a wall.
-
AlarmSense Standard Rate of Rise Heat Detector
When every second counts, trust the technology that responds fast and reliably. The AlarmSense Standard Rate of Rise Heat Detector is designed to detect rapid temperature increases, providing early warning of fire without false alarms triggered by daily heat variations.
Perfect for residential, commercial, and industrial applications, this intelligent device works seamlessly with AlarmSense two-wire systems—offering an efficient and cost-effective fire safety solution.
✅ Rapid Heat Detection
✅ Highly Accurate and Reliable
✅ Easy Installation with Two-Wire Technology
✅ Ideal for Kitchens, Warehouses, and Utility SpacesAt Trends Ventures Limited, your safety is our priority. Equip your buildings with advanced fire detection technology today and ensure peace of mind for tomorrow.
₦ 22,000.00₦ 24,000.00AlarmSense Standard Rate of Rise Heat Detector
₦ 22,000.00₦ 24,000.00 -
AlarmSense Optical Smoke Detector
AlarmSense Optical Smoke Detector – Reliable Fire Safety by Trends Ventures Limited
Stay protected with the AlarmSense Optical Smoke Detector, built for fast, accurate smoke detection. Perfect for homes, offices, and commercial buildings, it integrates easily into AlarmSense two-wire systems for efficient installation.
Key Features:
-
Fast response to slow-burning fires
-
Reduced false alarms
-
Compatible with AlarmSense control panels
-
Easy installation & low maintenance
-
LED status indicator for clear alerts
Now available at Trends Ventures Limited – your trusted fire and safety partner.
₦ 23,000.00₦ 25,000.00AlarmSense Optical Smoke Detector
₦ 23,000.00₦ 25,000.00 -
-
ZETA ZXT/R Xtratone Conventional Wall Sounder (Red)
-
Complies with EN54 Part 3 Type A
-
102dB @ 1m sound output
-
22 Tone patterns (site selectable)
-
Flush or surface fixing
-
Housed in UL V0 flame retardant ABS
-
4 x 20mm cable entries (2 top, 2 bottom)
-
First fix, wire to back box technology
₦ 60,000.00₦ 61,000.00ZETA ZXT/R Xtratone Conventional Wall Sounder (Red)
₦ 60,000.00₦ 61,000.00 -
-
ZETA ZP-CP4/B | CP4 Conventional Surface Mount Manual Call Point, Blue
Technical Specification
-
Current Rating:Â 3 Amps 12 – 24V DC
-
Low Current Rating:Â 1-100 mA
-
Housing and Mounting Box Material: Polycarbonate
-
Electrical Contact Material: Silver plated brass
-
Operating Temperature: -20 degrees C to +65 degrees C
-
Installation Terminal Conductor: Size 0.5mm – 2.5mm
-
Colour: Red
-
Mounting: Surfacce (with supplied back box) or Flush (optional flush mount bezel CP3-FMB required)
-
IP Rating: IP32
₦ 63,000.00₦ 65,000.00ZETA ZP-CP4/B | CP4 Conventional Surface Mount Manual Call Point, Blue
₦ 63,000.00₦ 65,000.00 -
chat with us