- You cannot add that amount of "C-TEC Flushing Mount Remote Status Unit Part No. EP210F" to the cart because there is not enough stock (0 remaining).
-
C-TEC ActiV Optical Smoke Detector Part No. C4416
-
-
-
DESCRIPTION
-
A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.
-
Manufactured by C-TEC in the UK.
-
Third-party certified to EN54-5 by Intertek.
-
Wide 6-33V DC operating voltage.
-
Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
-
Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
-
₦ 28,000.00₦ 30,000.00Buy nowC-TEC ActiV Optical Smoke Detector Part No. C4416
₦ 28,000.00₦ 30,000.00 -
-
C-TEC Economy Status Unit Part No. EP211
-
-
-
Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
-
Includes a mode (auto/manual) keyswitch.
-
Mounts on a standard UK single gang 25mm flush or surface back box.
-
Max. 8 economy status units per EP203 panel.
-
-
₦ 156,000.00₦ 159,000.00Buy nowC-TEC Economy Status Unit Part No. EP211
₦ 156,000.00₦ 159,000.00 -
-
C-TEC IP66 Rated Enclosure for EVC302GF or EVC302F Outstations Part No. BF359/1
-
- An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
- Includes a handle and mounting plate.
- Measures 200 W x 302 H x 123mm deep.
- Textured RAL 7035 (light grey) finish.
- Also compatible with C-TEC’s EP210F remote status units.
-
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370S
-
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- Smooth-action resettable element mimics the feel of breaking glass.
- Supplied with a red back box, reset key and ‘Not in Use’ label.
- Red LED ‘alarm ring’ illuminates call point face upon activation.
- Photoluminescent operating window remains visible for up to 5 minutes.
- Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
- IP66 weatherproof version (order code BF370S/W) also available.
₦ 5,500.00Buy now -
-
C-TEC Manual ‘Crack Glass/No Break’ Call Point, flush/surface Part No. BF370FR
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
-
C-TEC Manual ‘Crack Glass’ Call Point, surface Part No. BF370R
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).
-
C-TEC STI Euro Call Point Stopper, Flush Mount Multi Kit with Sounder Part No. STI-15020ML
-
- Protective cover for flush mounted manual call points.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Euro Stopper frame, two coloured housing shells (red & green), one break seal and two label sheets in 13 languages.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Euro Stopper with a Manual Call Point. The call point is NOT supplied.
-
-
C-TEC STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR
- IP56 rated protective cover for flush mounted manual call points.
- Suitable for indoor and outdoor use.
- Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.
- Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.
- Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.
- Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.
- Surface and non-sounder variants also available (see variants tab below).
- Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Manual ‘No Break’ Call Point, surface Part No. BF370MR
- Certified to EN54 Part 11 (LPCB/VdS).
- Unique ‘Plug & Play’ installation concept.
- Supplied with a non-breaking plastic resettable element.
- Includes a 470Ω resistor, test key and red back box.
- Anti-Tamper facility.
- Flush version (without a red back box) also available (order code BF370MFR).
-
C-TEC Manual IP67 ‘Crack Glass’ Call Point, surface Part No. BF370/W
- Certified to EN54 Part 11 (LPCB/VdS).
- Weather resistant and sealed to IP67.
- Ideal for use in external environments where water and dirt are likely to be present.
- Unique ‘Plug & Play’ installation concept.
- Supplied with a glass element.
- Includes a 470Ω resistor and test key.
- Anti-Tamper facility.
- Wide -25ºC to +70ºC operating range.
-
C-TEC STI Call Point Stopper, Flush Mount Part No. STI-6930
- Protective cover for flush mounted manual call points.
- Helps prevent accidental or malicious call point activation.
- Comprises a clear, tamper proof call point cover c/w red header labelled ‘IN CASE OF FIRE LIFT COVER – BREAK GLASS’.
- Surface version (ST-6931) and green versions also available (see variants tab below).
- Main picture shows Call Point Stopper with a Manual Call Point. The call point is NOT supplied.
-
C-TEC Yellow Extinguishant Release Call Point, Surface Part No. BF372
-
-
-
-
- Certified to EN54 Part 11 (LPCB/VdS).
- Ideal for use with C-TEC’s EP203 Automatic Extinguisher Panel.
- Supplied with a transparent hinged cover to prevent accidental operation.
- Includes a frangible glass element, test key and yellow back box (back box can be discarded for optional flush mounting).
- ‘Plug & Play’ installation concept.
- Labelled ‘Extinguishant Release’.
-
-
-
-
