-
Gent S4-34411 Interface Single Channel Output and Din Mounting Kit
Gent S4-34411 Interface Single Channel Output and Din Mounting Kit
The S4-34411 from Gent is an Interface Single Channel Output and Din Mounting Kit.
Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems.
₦ 190,000.00Buy now -
CTEC ZPF Network – fire alarm networking solution
🔹 Smart Network Technology
🔹 Scalable Architecture for Large Sites
🔹 Compatible with Addressable Systems
🔹 Reliable Performance in Critical EnvironmentsIdeal for hospitals, schools, commercial buildings, and industrial environments, the CTEC ZPF Network ensures real-time alerts, fault tolerance, and easy system expansion.
₦ 194,775.00₦ 199,775.00Buy nowCTEC ZPF Network – fire alarm networking solution
₦ 194,775.00₦ 199,775.00 -
C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 195,000.00₦ 200,000.00Buy nowC-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel
₦ 195,000.00₦ 200,000.00 -
-
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
Gent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
The VS-SPARE-24 is a Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72.
₦ 195,000.00Buy nowGent VS-SPARE-24 Replacement Spares Pack for Vigilon Control Panels – VIGPLUS-24 & VIGPLUS-72
₦ 195,000.00 -
ZETA Smart Connect Multiloop Card Module(MKII)
The SCM-MIM is a six input module that is
designed to be DIN mounted inside of a Smart
Connect Multiloop control panel. It’s powered
and interfaced to the Smart Connect Multiloop
via a RJ45 connection.₦ 195,500.00₦ 205,000.00Buy nowZETA Smart Connect Multiloop Card Module(MKII)
₦ 195,500.00₦ 205,000.00 -
Gent S4-34760-99 S-Quad Duct Mounting Bracket
Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.
₦ 196,500.00₦ 200,000.00Buy nowGent S4-34760-99 S-Quad Duct Mounting Bracket
₦ 196,500.00₦ 200,000.00 -
Gent VIG-NC-V3+ Network Card V3+
Gent VIG-NC-V3+ Network Card V3+
This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.
₦ 206,000.00Buy nowGent VIG-NC-V3+ Network Card V3+
₦ 206,000.00 -
Zeta 1 Zone Fire Alarm Control Panel Motherboard
🔧 Key Features:
-
Supports 1 fully monitored detection zone
-
Designed for Zeta conventional fire alarm panels
-
Robust microprocessor-based technology for stable operation
-
Easy-to-install layout for quick maintenance or upgrades
-
LED indicators for real-time status monitoring
Ideal for shops, small offices, schools, and homes, this motherboard is the core solution for maintaining safety and compliance in fire alarm systems.
₦ 210,000.00₦ 215,000.00Buy nowZeta 1 Zone Fire Alarm Control Panel Motherboard
₦ 210,000.00₦ 215,000.00 -
-
CTEC 2 Zone Plastic Fire Alarm Control Panel
✅ Cost-effective and user-friendly
✅ Supports conventional fire alarm systems
✅ LED indicators for easy monitoring
✅ Fully compliant with BS EN54 standards
✅ Compact and lightweight design for easy installationWhether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
₦ 211,050.00₦ 221,050.00Buy nowCTEC 2 Zone Plastic Fire Alarm Control Panel
₦ 211,050.00₦ 221,050.00 -
🔥 Fire Resistant Cable 1.0mm – 100 Meters Roll 🔥
✅ Durable | ✅ Heat-Resistant | ✅ Compliant with Safety Standards
Perfect for residential, commercial, and industrial use.
₦ 212,100.00₦ 222,100.00Buy now🔥 Fire Resistant Cable 1.0mm – 100 Meters Roll 🔥
₦ 212,100.00₦ 222,100.00 -
PAXTON NET2 PLUS 1DOOR CONTROLLER – 12V 2A PSU, PLASTIC CABINET 682-531
The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks.
₦ 215,000.00Buy now -
- Personal Protection
- Garrett
- Paxton
- Proximity Reader
- Proximity
- Proximity Card
- Proximity Reader
- PAXTON PROXIMITY 10 CARD PACK – GREEN, AMBER OR RED
- PAXTON CARDLOCK READER – SATIN CHROME
- PAXTON SWITCH 2 CONTROLLER
- PAXTON NET2 ENTRY MONITOR
- PAXTON ENTRY STANDARD PANEL – SURFACE MOUNT
- PAXTON NET2 ENTRY PREMIUM MONITOR – SURFACE MOUNT
- PAXTON NET2 ENTRY TOUCH PANEL SURFACE MOUNT
- PAXTON READER CABLE – HALOGEN FREE 10 CORE 100m
- PAXTON 12V 2A DC POWER SUPPLY PLASTIC CABINET
- PAXTON NET2 DESKSTOP READER, USB
- PAXTON NET 2 SOFTWARE PROFESSIONAL
- PAXTON NET2 PROXIMITY ISO CARDS – Without magstripe, per one
- PAXTON NET2 AIR BRIDGE
- PAXTON NET2 PLUS 1DOOR CONTROLLER – 12V 2A PSU, PLASTIC CABINET 682-531
- Paxton Net2 Plus 1 door controller (682-493 -EX)
- PAXTON Entry VR Panel – flush mount (337-500EX)
- PAXTON NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET 682-284
- PAXTON NET2 P50 PROXIMITY READERS(353-110 EX)
- Zeta
- Soca
- Solo
- SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
- Solo 100 Telescopic Access Pole
- Solo 111 Urban 0.5m Extension Pole
- Solo 110 Urban Telescopic Pole 1.75 Metres
- SOLO Testifier Smoke/Heat Detector TESTIFIRE1001-001
- Solo 330 Aerosol Smoke and CO Dispenser
- Solo 365 Electronic Smoke Detector Tester KITS
- Solo 200 – Universal Detector Removal Tool
- Solo 461-00 Cordless Heat Detector Heat Only
- Solo A5 Smoke Detector Tester Aerosol 250ml (Flammable)
- Gent
- C-Tec
- Ei Electronics
