-
C-TEC EP203 Automatic Extinguisher Panel Part No. EP203
-
Technical Specifications
-
Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
-
Mains supply 230V 50/60Hz.
-
Mains rated current 810mA max.
-
Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
-
Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
-
Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
-
Max battery size and type 2 x 12V 7Ah VRLA connected in series.
-
No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
-
Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
-
No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
-
EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
-
Max. sounder output current 3 x 200mA.
-
Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
EP212 relay card.
Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
be active for 1-300 seconds and to flood for 60-1800 seconds.
Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
sounders and scrolling.
Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
status units (2 wire power + 2 wire mode select).
Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
Construction & finish Metal back box; metal chassis’ plastic lid.
IP Rating IP30.
Weight 4.2kg (without batteries).
Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%
₦ 570,000.00₦ 600,000.00Buy nowC-TEC EP203 Automatic Extinguisher Panel Part No. EP203
₦ 570,000.00₦ 600,000.00 -
-
Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
Gent S4-34740 Addressable Beam Sensor Pair
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
₦ 580,000.00₦ 660,000.00Buy nowGent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
₦ 580,000.00₦ 660,000.00 -
C-TEC 1 Loop Repeater Panel
Key Functions & Advantages:
✅ Real-Time Fire System Replication – Mirrors the main panel to deliver instant updates on alarms, faults, and system status.
✅ User-Friendly Interface – Intuitive LED display and controls make system monitoring and interaction simple.
✅ Remote Monitoring – Perfect for use in remote areas of large buildings or multiple access points.
✅ Secure Access – Equipped with key-operated controls to prevent unauthorized use.
✅ Seamless Integration – Compatible with C-TEC’s renowned range of fire alarm systems, ensuring full interoperability.
✅ Compact & Stylish – Sleek design that fits into modern architectural environments without taking up space.
✅ Cost-Effective Expansion – Reduces the need for multiple main panels while maintaining full oversight.₦ 589,575.00₦ 590,000.00Buy nowC-TEC 1 Loop Repeater Panel
₦ 589,575.00₦ 590,000.00 -
CTEC 1 Loop Repeater Panel – Enhance fire detection system
✅ Easy to install
✅ Compatible with CTEC 1 loop fire panels
✅ Ideal for multi-exit facilities and remote monitoring
✅ Improves response time and situational awarenessCTEC – Trusted Fire Safety, When Every Second Counts.
₦ 607,950.00₦ 650,950.00Buy nowCTEC 1 Loop Repeater Panel – Enhance fire detection system
₦ 607,950.00₦ 650,950.00 -
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
The VIG-BSKIT is a Conversion Kit for VIG1-24 EN 54 to BS / V3+ functionality
₦ 610,000.00Buy now -
CTEC 3+1 Extinguishing Panel – Fire Suppression Control
✅ Fully addressable and easy to install
✅ Compatible with multiple extinguishing agents
✅ Built-in timer delays and programmable inputs/outputs
✅ Clear LCD display with real-time status updates
✅ Approved to EN12094-1 standards💼 Perfect for: Data Centres | Plant Rooms | Electrical Cabinets | Server Hubs
₦ 610,575.00₦ 630,575.00Buy nowCTEC 3+1 Extinguishing Panel – Fire Suppression Control
₦ 610,575.00₦ 630,575.00 -
Gent Xenex 2 Zone Conventional Fire Alarm Panel
FEATURES
-
-
Gent Xenex 13270-02LB
-
2 sounder circuits
-
1A sounder circuit max load
-
Conforms to EN54: parts 2 & 4
-
On-board relay
-
Fire and fault relay expansion card optional
-
Easy configuration
-
Class change input
-
₦ 624,750.00₦ 630,000.00Buy nowGent Xenex 2 Zone Conventional Fire Alarm Panel
₦ 624,750.00₦ 630,000.00 -
-
Gent 2 Zone Panel
Why Choose Gent Panels?
-
Proven Honeywell technology
-
Scalable for any building size
-
Long-term reliability and low maintenance
-
Seamless integration with voice alarms, smoke vents, and emergency lighting
From conventional setups to smart addressable systems – Gent has you covered.
👉 Ready to upgrade your fire safety? Visit safetechhub.com or contact us for professional advice and supply.₦ 624,750.00₦ 630,750.00Buy nowGent 2 Zone Panel
₦ 624,750.00₦ 630,750.00 -
-
Zeta Quatro Repeater Panel
✅ Advantages & Functions:
-
Remote Monitoring: Displays real-time information from the main fire alarm control panel in multiple areas.
-
Easy Installation: Simple wiring and configuration process with seamless integration into your existing fire alarm system.
-
User-Friendly Interface: Clear LCD screen for quick status identification and alerts.
-
Efficient Alarm Management: Instantly replicates fire, fault, and system warnings to ensure fast decision-making.
-
Improves Safety Compliance: Enhances fire safety infrastructure and meets stringent fire safety standards.
-
Multiple Mounting Options: Flexible design for wall or flush mounting.
-
Cost-Effective Expansion: Extend system coverage without installing a full control panel in every location.
-
Customizable Zoning: Supports zone indication for precise alarm origin tracking.
₦ 630,000.00₦ 650,000.00Buy nowZeta Quatro Repeater Panel
₦ 630,000.00₦ 650,000.00 -
-
Zeta Quatro Repeater Panel – fire alarm system upgrade
🔹 Key Features:
-
Full compatibility with Zeta addressable fire alarm panels
-
High-visibility LCD display for instant status updates
-
Easy setup with minimal wiring
-
Scalable for large installations
-
Certified and compliant with international fire safety standards
₦ 630,000.00₦ 635,000.00Buy nowZeta Quatro Repeater Panel – fire alarm system upgrade
₦ 630,000.00₦ 635,000.00 -
-
Gent VSINTM-PCB-UPG Replacement Card for Mains Powered Interface-34440
Gent VSINTM-PCB-UPG Replacement Card for Mains Powered Interface (34440)
The VSINTM-PCB-UPG is a Replacement Card for Mains Powered Interface (34440).
₦ 635,000.00Buy now -
Gent VIG-NC-FO Fibre Optic Network Card
 The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
The VIG-NC-FO is a fibre optical network card designed for the Vigilon Network. The fibre network card allows fast message passing to the network.
The card must be plugged into the backplane of the panel or node in a dedicated slot. The fibre optic cables connect directly to sockets on the card. There are two builds of the fibre network cards for secure EN54 and BS Vigilon networks.
₦ 650,000.00Buy nowGent VIG-NC-FO Fibre Optic Network Card
₦ 650,000.00
- Personal Protection
- Garrett
- Paxton
- Proximity Reader
- Proximity
- Proximity Card
- Proximity Reader
- PAXTON PROXIMITY 10 CARD PACK – GREEN, AMBER OR RED
- PAXTON CARDLOCK READER – SATIN CHROME
- PAXTON SWITCH 2 CONTROLLER
- PAXTON NET2 ENTRY MONITOR
- PAXTON ENTRY STANDARD PANEL – SURFACE MOUNT
- PAXTON NET2 ENTRY PREMIUM MONITOR – SURFACE MOUNT
- PAXTON NET2 ENTRY TOUCH PANEL SURFACE MOUNT
- PAXTON READER CABLE – HALOGEN FREE 10 CORE 100m
- PAXTON 12V 2A DC POWER SUPPLY PLASTIC CABINET
- PAXTON NET2 DESKSTOP READER, USB
- PAXTON NET 2 SOFTWARE PROFESSIONAL
- PAXTON NET2 PROXIMITY ISO CARDS – Without magstripe, per one
- PAXTON NET2 AIR BRIDGE
- PAXTON NET2 PLUS 1DOOR CONTROLLER – 12V 2A PSU, PLASTIC CABINET 682-531
- Paxton Net2 Plus 1 door controller (682-493 -EX)
- PAXTON Entry VR Panel – flush mount (337-500EX)
- PAXTON NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET 682-284
- PAXTON NET2 P50 PROXIMITY READERS(353-110 EX)
- Zeta
- Soca
- Solo
- SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
- Solo 100 Telescopic Access Pole
- Solo 111 Urban 0.5m Extension Pole
- Solo 110 Urban Telescopic Pole 1.75 Metres
- SOLO Testifier Smoke/Heat Detector TESTIFIRE1001-001
- Solo 330 Aerosol Smoke and CO Dispenser
- Solo 365 Electronic Smoke Detector Tester KITS
- Solo 200 – Universal Detector Removal Tool
- Solo 461-00 Cordless Heat Detector Heat Only
- Solo A5 Smoke Detector Tester Aerosol 250ml (Flammable)
- Gent
- C-Tec
- Ei Electronics
