The addressable base incorporates a fire alarm sounder with its own address. Monitored and controlled from the fire alarm control panel, independent of the detector installed in the base. The digital loop provides both power and communications for the sounder and detector.
Features:
- A compact and discrete solution
- One point of installation for detector, sounder and visual indicator with no additional wiring
- Reflective Sound Monitoring (RSM)
- Light is electronically monitored by the control panel
- Automatic self-test
- Independent addressable control of the sounder and beacon
- Built-in line isolator
- Select the tone, volume and flash rate using panel configuration software
- 15 selectable tones. Allows users to select the tone with which they are most familiar
- Realistic conventional bell tone
- 4 selectable volumes
- 2 selectable flash rates
-
APOLLO ISOLATOR BASE 45681-211APO
The Isolator Base is unique and designed to only accept the Isolator 55000-720.
-
APOLLO XPERT 7 BASE – HEATED 45681-219APO
The base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors.
- Raises the ambient temperature of a detector chamber by approximately 10°C
- Limits the risks or potential for losses of functionality of detectors installed in cold conditions.
-
XPERT 7 BASE – DEEP 45681-209APO
XPERT 7 DEEP BASE is a mounting base for Discovery and XP95 products which has an increased depth allowing for cables to be inserted from the side.
-
APOLLO XP95 I.S. OPTICAL SMOKE DETECTOR [SIL2] 55000-640SIL
Full details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide. XP95 I.S. detectors have the same operating characteristics as the standard versions.
- Responds well to slowburning, smouldering fires
- Well-suited to escape routes
- Unaffected by wind or atmospheric pressure
-
APOLLO XP95 HEAT DETECTOR (A2S) 55000-420APO
The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.
- Reliable fire detection in areas with a wide temperature range from -20°C to +70°C
- Ideal for environments that are dirty or smoky under normal circumstances
- Unaffected by wind and atmospheric pressure