Popular
Category: Addressable fire alarm
Addressable fire alarm system works by having every detection and notification device connected to each other and to control panel. In contrast to a conventional fire alarm system, which uses electrical currents, addressable system sends digital signals in binary code. Addressable systems function similarly to computers, converting voltage variations to binary code, consists of various combinations of zeros and ones. This enables the addressable fire alarms system to then send critical information to a control panel with a broader range of data. An addressable system can also pinpoint the precise location of smoke or fire, increasing safety and also reliability.
Showing 1–16 of 78 results
-
| Zeta ZT-MAINS-5 Mains Photoelectric Smoke Alarm with 9V Battery Back-Up
₦12,000.00Add to cartThe ZAIO-MI is used when both an input needs to be monitored and at the same time a local output (relay output) needs to be triggered to switch ancilliary equipment on or off during an alarm condition.
-
APOLLO INTELLIGENT MANUAL CALL POINT – BLUE (SA5900-905APO)
Read moreThe Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – ORANGE (SA5900-907APO)
Read moreThe Manual Call Point is commonly used to manually control smoke vent systems.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – RED (SA5900-908APO)
Read moreThe Manual Call Point is used to manually initiate an alarm signal on the fire detection system.
- EN 54-11 & EN 54-17 Certified
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO INTELLIGENT MANUAL CALL POINT – YELLOW (SA5900-904APO)
Read moreThe Manual Call Point is commonly used to manually control extinguishant release.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO ISOLATOR – NEGATIVE 55000-720APO
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section
- Detects wiring short-circuits
- Minimises disruption from short-circuits
- Automatic de-isolation on the short-circuit removal
-
APOLLO ISOLATOR BASE 45681-211APO
Read moreThe Isolator Base is unique and designed to only accept the Isolator 55000-720.
-
APOLLO WHITE INTELLIGENT MANUAL CALL POINT – (SA5900-903APO)
Read moreThe Manual Call Point is commonly used to manually initiate a hazard alert.
- Resettable operating element
- 170° viewable LED
- Suitable for semi flush or surface mounting
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95, Discovery and CoreProtocol compatible
-
APOLLO XP95 HEAT DETECTOR (A2S) 55000-400APO
₦24,500.00Add to cartThe XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.
- Reliable fire detection in areas with a wide temperature range from -20°C to +70°C
- Ideal for environments that are dirty or smoky under normal circumstances
- Unaffected by wind and atmospheric pressure
-
APOLLO XP95 HEAT DETECTOR (A2S) 55000-420APO
Read moreThe XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.
- Reliable fire detection in areas with a wide temperature range from -20°C to +70°C
- Ideal for environments that are dirty or smoky under normal circumstances
- Unaffected by wind and atmospheric pressure
-
APOLLO XP95 HEAT DETECTOR (CS) 55000-401APO
₦19,000.00Add to cartThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature.
-
APOLLO XP95 I.S. HEAT DETECTOR (A2S) [SIL2] 55000-440SIL
Read moreThe XP95 I.S. Heat Detector is distinguishable from XP95 I.S. smoke detectors by its low air-flow resistance case which allows good contact between the sensing thermistor and the surrounding air.
-
APOLLO XP95 I.S. OPTICAL SMOKE DETECTOR [SIL2] 55000-640SIL
Read moreFull details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide. XP95 I.S. detectors have the same operating characteristics as the standard versions.
- Responds well to slowburning, smouldering fires
- Well-suited to escape routes
- Unaffected by wind or atmospheric pressure
-
APOLLO XP95 I.S. OPTICAL SMOKE DETECTOR 55000-640APO
Read moreThe XP95 I.S. Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
APOLLO XP95 MULTI-SENSOR DETECTOR (OPTICAL/HEAT) 55000-885APO
Read moreThe XP95 Multi-Sensor Detector combines independent optical smoke and temperature sensors for better fire detection in areas with deceptive phenomena.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Unaffected by wind and atmospheric pressure
- Alternative to Ionisation detectors
-
APOLLO XP95 OPTICAL SMOKE DETECTOR – BLACK 55000-660APO
Read moreThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
