Category: Addressable fire alarm

Addressable fire alarm system works by having every detection and notification device connected to each other and to control panel. In contrast to a conventional fire alarm system, which uses electrical currents, addressable system sends digital signals in binary code. Addressable systems function similarly to computers, converting voltage variations to binary code, consists of various combinations of zeros and ones. This enables the addressable fire alarms system to then send critical information to a control panel with a broader range of data. An addressable system can also pinpoint the precise location of smoke or fire, increasing safety and also reliability.

Showing 1–16 of 244 results

wishlist

Out of Stock
Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
Gent S4-34842 Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)

Every manual call point is continuously monitored ensuring a trigger is responded to in less than one second system wide.

The range includes options for glass and resettable elements and lift-up protective covers.

A key switch version is also available for areas where tampering or vandalism is expected. An Environmentally Protected (EP) version with Ingress protection rating IP67 is also available, complete with resettable element, protective cover and backbox.

Manual call points for the Vigilon and Nano system are easy to install and can be mounted on standard installation back boxes or bespoke red back boxes for surface mounting.
Read more
wishlist

CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
Original price was: ₦13,000.00.Current price is: ₦11,000.00.

The Smart Smoke Detector improves the security of your home.

When a fire breaks out and the Smart Smoke detector activates, it sends real-time notifications directly to your smartphone,

In this way, you can intervene even when you are not at home.

The wireless WiFi smart smoke sensor ensures an adequate level of fire safety when you are in the house by activating the siren with an intensity of 80dB.

Using the Tuya Smart and SmartLife application based on IoT (internet of things) technology, you are notified on your mobile phone in the event of a fire.

Useful for installation in homes, businesses, hospitals, restaurants and other places that need protection.

The LED lights red twice a minute to signal a battery change and a low battery notification on the phone.

Notification if the battery access cover is open.

Add to cart
wishlist

CONCEPT TUYA WL-1201 TUYA SOCKET SMART PLUG
Original price was: ₦17,000.00.Current price is: ₦15,000.00.

Smart Plug Tuya / Smart LifeVoice command Compatible With Google Home , Alexa etcInput Voltage : AC90~250VOutput Power : 900~2500WMax load

Add to cart
wishlist

CONCEPT (Burglar Alarm System) Smart Home WIFI+GSM
Original price was: ₦116,000.00.Current price is: ₦114,000.00.

WIFI+GSM alarm system, Support Tuya APP

• 24 wireless zones for 24 wireless sensors and 10 remote controls
• Big SOS button
• 6 groups of alarm phone NO. and 3 groups SMS Phone NO. Message pushing in time.
• Factory reset easily on app.
• Add sensors&remote controls, set alarm phone NO. and SMS message NO. on “Tuya” APP, Operate easily!

• linkage the smart switch, wifi camera and Other smart Home devices.

• Input Voltage: DC9V~12V

• Wireless Frequency: 433MHz

• GSM frequency: 850/900/1800/1900MHz
• Backup Rechargeable Battery: lithium DC7.2V
• Alarm Loudness: 85db (Internal siren)

• Lower battery remind function

• Door sensor two-way communication(Optional)

Add to cart
wishlist

Zeta Maxitone Addressable Fire Alarm Sounder & Sounder Flasher
Original price was: ₦99,000.00.Current price is: ₦95,000.00.
It is available as a sounder only in red or white, or as a combined sounder flasher in transparent red.

It is suitable for indoor & outdoor use

It has a large back box with knockout cable entries, which has plenty of room for fitting the cables.

It has an internal 8-way dip switch for setting the device address and a sound output of 94 dBA @ 1m.
Both units have a built-in short circuit isolator to provide system integrity in the event of cable damage.
Select options
wishlist

ZETA ADDRESSABLE FIRE ALARM EXTRATONE SOUNDER BEACON FRYREYE II PROTOCOL-AXTB/R
₦88,000.00 – ₦89,000.00

Complies with EN54 Pt 3 Type A & EN54 Pt 23
102dB @ 1m sound output
22 Tone patterns (site selectable)
Flush or surface fixing
Housed in UL V0 flame retardant ABS
4 x 20mm cable entries (2 top, 2 bottom)
First fix, wire to back box technology
Flashing Rate 0.5Hz

Select options
wishlist

Zeta Addressable Securetone 2 Combined Fire Alarm Sounder & Flasher
Original price was: ₦65,000.00.Current price is: ₦60,000.00.
Complies fully to EN-54 part 3

85 dB @ 1 metre

Includes short circuit isolator

Low current consumption

Loop isolation option

Compatible with all Zeta addressable panels

DIP switch address setting

Shadow sounder option
Select options
wishlist

Zeta Fyreye MkII Addressable Fire Alarm i/o Module With Isolator
Original price was: ₦75,000.00.Current price is: ₦71,000.00.
Loop-powered (60 devices per loop as maximum)

Hand addressed using the 8-way dip switch OR

Softly addressed using our handheld MKII

Programmer (part no. 48-004)

Equipped with short circuit line isolator

Extensive front unit indications
Add to cart
wishlist

Zeta Fyreye MkII Addressable Fire Alarm Input Module With Isolator
Original price was: ₦75,000.00.Current price is: ₦73,000.00.
Loop-powered (60 devices per loop as maximum)

Hand addressed using the 8-way dip switch OR

Softly addressed using our handheld MKII

Programmer (part no. 48-004)

Equipped with short circuit line isolator

Extensive front unit indications
Add to cart
wishlist

Out of Stock
APOLLO Fire Alarm Discovery UL Manual Pull Station – Dual Action
The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.

UL38 Certified

Reports an alarm in under 0.2 seconds

Key lock

Easily resettable

Suitable for semi flush or surface mounting

XP95, (Discovery and CoreProtocol compatible)
Read more
wishlist

Out of Stock
APOLLO Addressable Fire Alarm XP95A MINI PRIORITY SWITCH MONITOR MODULE
The XP95A Mini Priority Switch Monitor Module is designed to monitor the state of one or more single pole, voltage free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.

Three input states – ’normal’, ‘trouble’ and ’alarm’

Visible LED with remote LED connection option

Loop-powered

Designed to fit into equipment with limited space

Easy to install

Monitors equipment where a fast response is required

Interrupt facility
Read more
wishlist

Out of Stock
APOLLO Addressable Fire Alarm TESTIFIRE TS3 – SMOKE CAPSULE (PACK OF 3)

Testifire Capsules use the latest technology stimuli generation and delivery, eliminating detector contamination and damage risk through controlled release.

Read more
wishlist

Out of Stock
APOLLO Addressable Fire Alarm SOLO 461 – CORDLESS HEAT DETECTOR TESTER

Test and maintenance equipment for smoke, heat and CO detectors.

Read more
wishlist

Out of Stock
APOLLO Addressable Fire ALarm ISOLATOR
The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.

Detects wiring short-circuits using patented technology

Minimizes disruption from short-circuits

Automatic de-isolation on short-circuit removal

Up to 20 devices may be installed between isolators
Read more
wishlist

Out of Stock
APOLLO Addressable Fire Alarm DISCOVERY UL MANUAL PULL STATION BACKBOX

The Discovery UL Manual Pull Station Backbox is used to allow surface mounting of the Discovery UL Manual Pull Station.

Read more
wishlist

Out of Stock
APOLLO Addressable Fire DIN-RAIL MINI SWITCH MONITOR MODULE XP95A
The XP95A DIN-Rail Mini Switch Monitor Module is used to monitor one or more single pole, volt free contacts connected on a single pair of cables and report status to fire control panel.

EN 54-17 & EN 54-18 Certified

Designed for use where space is limited

Allows DIN-Rail mounting

Priority and non-priority settings

Pre-alarm’ status available

XP95, Discovery compatible
Read more